3M Scotch-Brite (TM) flap brush CF-FB 200 mm x 50 mm x 75 mm 7100139679

Use Scotch-Brite (TM) Clean and Finish Flap Brushes CF-FB to achieve consistent removal and finish over the life of the product. Our Clean and Finish Flap Brushes feature an abrasive mineral bonded to fibers. The Scotch-Brite (TM) Flap Brush for Finishing provides better consistency and control for a variety of preparation and finishing applications including brushing on copper, brass, stainless steel and aluminum. The flap brushes do not require chemical compounds. They are therefore ideal for fine finishes and achieve aesthetic surface results. They are used for smoothing wood fibers, removing fibers from wood, plastic, composite surfaces and for roughening seals. These brushes are available with silicon carbide or aluminum oxide abrasive mineral. . This mineral is suitable as a robust, durable abrasive. It forms points and edges that break off during grinding, exposing fresh cutting edges. As a result, it remains sharp for longer than conventional abrasives. The disc is often used for grinding and finishing due to its high removal rate, hardness and strength. Aluminum oxide is suitable for a wide range of materials in both woodworking and metalworking, including ferrous alloys. Scotch-Brite abrasives are unique products for surface finishing. The abrasives are bonded in a non-woven fiber matrix. The combination of abrasive and non-woven material creates a sanding and polishing system that produces consistent results over the life of the product. The open non-woven structure enables cool sanding and is dust-repellent, so that the nylon fibers retain their high removal rate because they do not clog.