3M solvent-based nitrile rubber adhesive 1099 gold-yellow 150 ml 7000033748

3M (TM) Plastic Adhesive 1099 with a bonding time of 40 minutes dries quickly. The product is resistant to oil, fuels and plasticizers. With a temperature range between -40 °C and +120 °C, good adhesion is achieved on many plastics as well as on hard and soft PVC. Nitrile rubber-based plastic adhesive 3M (TM) Plastic Adhesive 1099 is a nitrile rubber-based solvent adhesive for bonding decorative films to fiber-reinforced plastics, ABS, PA, rigid and soft PVC, rubber, foams, metals, wood, leather, etc. - creating strong, durable bonds. - This creates strong and durable bonds. However, the product may stain thin or light-colored vinyl surfaces. Possible applications Bonding plastics and PVC Automotive repairs including upholstery or installation of switch panels Banners and awnings General industrial manufacturing Maintenance and repair Accelerate general bonding processes 3M (TM) Solvent Adhesive for Plastics 1099 has good wetting properties and is easy to apply. After evaporation of the solvent, good strength is quickly achieved. The bonding partners can be reactivated by solvents or by heat in combination with pressure. The product can also be easily sprayed - this makes large-area applications convenient and the materials are evenly wetted. Adhesive application 3M (TM) Solvent Adhesive 1099 is applied with a spray gun, brush or roller. Stir the product well before use and apply evenly to both surfaces. If the solvent-based adhesive is applied in overlapping coats, this first coat should sufficiently wet most surfaces. Effective coverage is achieved when at least 80% of the surface is covered with the solvent cement. Highly absorbent and porous substrates may require a second application. Following the flash-off time, which depends on temperature, humidity and air circulation as well as the porosity of the material surfaces, the components are joined within the bonding range.