ATORN 1/100 machine reamer set, HSSE, DIN 212, 5.98–10.02 mm, 0–0.003 mm
Brand: ATORN
Surface: Uncoated
DIN: 212 similar
Art.-no. 11622040
Manufacturer article no. 10041215
EAN 4050293005233
Application
For producing fit tolerances in through holes (nominal size=0/+0.003 mm) on a NC machine or conventional machines up to 1000 N/mm².
Execution
- 7-8° left-hand spiral, type B up to diameter 2.03 mm with dual-sided centring point and continuous shank, type D from diameter 2.98 mm with centring hole and offset shank
Advantage
- good bore hole quality (dimensional tolerance, roundness, surface quality)
Brand | ATORN |
Main EAN Code | 4050293005233 |
Manufacturer Part Number | 10041215 |
Cutting material | HSSE |
Tolerance of fit | 0 / +0,003 mm |
Groove type | Left-hand twist, 7-8° |
Surface | Uncoated |
Tool holding device | HA parallel shank |
Composition of set | 5.98/5.99/6,00/6.01/6.02/6.98/6.99/7.00/7.01/7.02/7.98/7.99/8.00/8.01/8.02/8.98/8.99/9.00/9.01/9.02/9.98/9.99/10.00/10.01/10.02 |
Number of pieces in assortment/set | 25 PCS |
DIN | 212 similar |
Gross Weight | 1.500 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/U] | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 10-20 | ⚫ | |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 10-20 | ⚫ | |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 10-18 | ⚫ | |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 8-12 | ⚫ | |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 8-10 | ⚫ | |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 8-10 | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 6-10 | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 5-8 | ⚪ | |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 5-8 | ⚪ | |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 5-8 | ⚪ | |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 5-8 | ⚪ | |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 15-30 | ⚫ | |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 15-25 | ⚫ | |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 10-25 | ⚪ | |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 10-20 | ⚫ | |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 20-30 | ⚫ | |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 15-30 | ⚪ | ||
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 20-25 | ⚫ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 15-30 | ⚪ | ||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | |||
| 3.10 Graphite | C8000 | <60 | - | |||
| 3.11 Composite materials | - | |||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 8-14 | ⚫ | |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 8-14 | ⚫ | |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 8-14 | ⚫ | |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 4-6 | ⚪ | |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 4-6 | ⚪ | |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 4-6 | ⚪ | |
Last viewed
ATORN indexable insert, CBN, coated, CNGA 120404W ABC10B/E S4
Drawer, 60mm/40mm, full ext., 70 kg, RAL 7035/7016 for 550 S int.: 600x450mm
ATORN solid carbide roughing cutter UNI diameter 20.0x38x104mm, T4, HB shaft
MITUTOYO gauge block with JCSS certificate, 30 mm, Zero Cera ceramic
ORION rings for mill arbours, 27 x 6 mm, shape B DIN 2084
ZARGES LM stepladder, ladder length 1.45 m 2 x 6 steps
