ATORN HPC end mill, long, KR dia. 5x17x22x62 mm T=4 HA r=0.1 RockTec PRO
Brand: ATORN
Surface: RockTec PRO
Length: 62 mm
Art.-no. 16950382
Manufacturer article no. 11264643
EAN 4066107031947
Application
HPC end mill in long version for machining materials up to 65 HRC, e.g. in die and mould making. Optimal application in trochoidal milling and in edge, corner and groove machining.
Execution
- Ultra Micro fine grain cutting material
- Cutting edge finish
- HA shank in line with DIN 6535
- with clearance
- unequal cutting edge pitch
- optimised cutting edge design
- Type H
- With RockTec PRO coating
Advantage
- optimum chip removal and temperature resistance
- Optimised geometry for machining hard materials
- maximum service life due to RockTec PRO coating
- ideal for static and dynamic trochoidal milling
Brand | ATORN |
Main EAN Code | 4066107031947 |
Manufacturer Part Number | 11264643 |
Cutting material | SC |
Surface | RockTec PRO |
Type | H |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 45° |
Tool holding device | HA parallel shank |
Construction length | Long |
Cutting edge diameter | 5 mm |
Cutting edge length | 17 mm |
Clearance length | 22 mm |
Length | 62 mm |
Clearance diameter | 4.7 mm |
Shank diameter | 6 mm |
fz hard 65 HRC | 0.042 mm |
Gross Weight | 0.026 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 100-180 | 0.040 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 100-180 | 0.040 | ⚫ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 100-140 | 0.040 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 80-120 | 0.040 | ⚫ | |
Last viewed
FETRA tilting container, 0.8 m³, load 800 kg, LxWxH 1321x1044x735 mm, RAL 7016
ATORN M3-M12 scrw tap set and core hole drill bits M3-M12 BH 2.5xD 15° P
ORION collet chuck, sealed, ER32 clamping diameter 15.0 mm
ANKE workbench model 255 V, panel, univ. coating, 1500x700x900 mm, RAL 7035/7016
ATORN SC HPC end mill diameter 6.0 x 13 x 20 x 57 mm, HB shaft
DAkkS calibration vernier callipers 0–300 mm
ATORN SC TiAlNplus high-feed drill, 5xD diameter 17.2 mm, HA shaft, with IC