ATORN RockTec PRO mini end mill, long neck 0.6x0.9x4x45 mm T=2 HA
Brand: ATORN
Surface: RockTec PRO
Length: 45 mm
Art.-no. 16950028
Manufacturer article no. 11264693
EAN 4066107032449
Application
Mini end mill with a long neck for machining materials up to 65 HRC, e.g. in die and mould making.
Execution
- Ultra Micro fine grain cutting material
- Cutting edge finish
- HA shank in line with DIN 6535
- with clearance
- Type H
- With RockTec PRO coating
Advantage
- optimum chip removal and temperature resistance
- optimised geometry for machining hard materials
- maximum service life due to RockTec PRO coating
Brand | ATORN |
Main EAN Code | 4066107032449 |
Manufacturer Part Number | 11264693 |
Cutting material | SC |
Surface | RockTec PRO |
Type | H |
Number of cutting edges (Z) | 2 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 0.6 mm |
Cutting edge length | 0.9 mm |
Clearance length | 4 mm |
Length | 45 mm |
Clearance diameter | 0.58 mm |
Shank diameter | 4 mm |
fz hard 65 HRC | 0.008 mm |
Gross Weight | 0.009 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 120-200 | 0.009-0.012 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 120-200 | 0.009-0.012 | ⚫ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 80-150 | 0.009-0.012 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 60-130 | 0.009-0.012 | ⚫ | |
Last viewed
ATORN high-feed arbour mill. cutter diameter 35.0 mm T6 internal coolant supply
ATORN NC reamer HSSE T=6 D 7-8° 2.8mm H7 x 61mm x 15mm HA DIN 212
ATORN twist drill TLP HSSE, DIN 340, 8.1 mm x 165 mm x 109 mm, 130°
EICHINGER tipping container transverse + long. 1,000 kg 1,000 l hot-dip galv.
BOSCH Hammerbohrer 1618596170
LESSMANN conical brush w/ anti-clockwise braid. wire 471857 st. stl. wire brist.
ORION solid carbide end mill 45 degrees, TiAlN 5.0x13x57 mm shaft DIN 6535HB T=4