ATORN SC HPC end mill diameter 8.0 x 20 x 30 x 64 mm, HB shaft
Brand: ATORN
Surface: ULTRA MS
Length: 64 mm
Art.-no. 16670266
Manufacturer article no. 11861064
EAN 4050293359886
Application
HPC end mill with uneven helical and uneven pitch for rough machining and finish machining of stainless steel, titanium alloy, nickel and copper alloys. The uneven helical pitch means that vibrations on the tool are reduced, which results in outstanding finished surfaces, while, at the same time, feed rates and cutting depths can be increased.
Execution
- ultra-fine grain cemented carbide
- with uneven helical and cutter distribution (35/38°)
- HB straight shank
- with clearance
- high-performance ULTRA MS layer
- with edge protection chamfer
- defined cutting edge rounding
- centre cutting
Advantage
- rough machining and finishing with just one tool
- optimum suitability for trochoidal milling
- HPC geometry for maximum feed rates and running smoothness
- suitable for large cutting depths
Brand | ATORN |
Main EAN Code | 4050293359886 |
Manufacturer Part Number | 11861064 |
Cutting material | SC |
Surface | ULTRA MS |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 35° |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 8 mm |
Cutting edge length | 20 mm |
Clearance length | 30 mm |
Length | 64 mm |
Edge protection chamfer length | 0.2 mm |
Clearance diameter | 7.4 mm |
Shank diameter | 8 mm |
fz stainless steel | 0.036 mm |
Gross Weight | 0.041 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 120-140 | 0.048 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 130-150 | 0.048 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 130-150 | 0.048 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 120-140 | 0.048 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 120-140 | 0.048 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | ||
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | ||
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | ||
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 60-80 | 0.036 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 60-80 | 0.048 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 60-80 | 0.036 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 60-80 | 0.048 | ⚫ |
Last viewed
ORION high-perf. drill, SC TiAlN, HPC 5xD w/out IC 6.2mm x8 mm x91 mm HB ext.
GEDORE spare complete hickory sledgehammer handle for 4,000 g ROTBAND-PLUS
ATORN SC mini torus mill cttr TiAlSiN 0.2x0.2x50 mm clearance 0.18x3 mm R 0.05
ATORN indexable insert CBN VCGW 110302 ABC X15-B-2
Shim for holders HK CG14
ATORN mini cutting insert AFR 6.0mm B1.5 L22 HC5640
ATORN solid carbide drill UNI TiAlNplus 5xD without IC 9.2 mm straight shank HA
ORION bi-met. bandsaw bl. UNI combi t. 10° M42 34x1.1 mm 2/3, weld. service 3
