ATORN SC HPC torus milling cutter, Ø 20.0 x 38 x 58 x 104 mm, HA shaft, r=4 mm
Brand: ATORN
Surface: ULTRA MS
Length: 104 mm
Art.-no. 16672264
Manufacturer article no. 11861132
EAN 4050293360561
Application
HPC torus milling cutter with an unequal twist and unequal pitch for smoothing and rough machining stainless steels and titanium, Ni and Co alloys. The unequal twist angle prevents vibration on the tool, thereby ensuring excellent finishing surfaces as well as higher feed rates and greater cutting depths.
Execution
- Ultra-fine grain cemented carbide
- HA straight shank
- With clearance
- ULTRA MS high-performance coating
- Defined cutting edge rounding
- Centre cutting
Advantage
- Rough machining and smoothing with a single tool
- Ideal for trochoidal milling
- HPC geometry for optimum feed rates and running smoothness
- Suitable for large cutting depths
Brand | ATORN |
Main EAN Code | 4050293360561 |
Manufacturer Part Number | 11861132 |
Cutting material | SC |
Surface | ULTRA MS |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 35° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 20 mm |
Cutting edge length | 38 mm |
Clearance length | 58 mm |
Length | 104 mm |
Clearance diameter | 19 mm |
Shank diameter | 20 mm |
Edge radius | 4 mm |
fz stainless steel | 0.08 mm |
Gross Weight | 0.420 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 120-140 | 0.1 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 130-150 | 0.1 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 130-150 | 0.1 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 120-140 | 0.1 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 120-140 | 0.1 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | ||
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | ||
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | ||
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 60-80 | 0.09 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 60-80 | 0.12 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 60-80 | 0.09 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 60-80 | 0.12 | ⚫ |
Last viewed
Tool set, basic hand tool assortment, workbench, 19 pieces
ATORN solid carbide drill UNI TiAlNplus 3xD with IC 8.8 mm straight shank HA
FAHRION wedge collet chuck 4546E 20.00 mm RD GERC32-W
ATORN combination wrench 13 mm DIN 3113 B
ATORN high-perf. SC drill ULTRA M HPC 3xD 15.0 mm x 16 mm x 115 mm HB internal
ATORN elec. dial gauge type B 12.5 mm range 0.001 mm increment for dynamic meas.
FEIN cemented carbide core drill bit 55 mm with QuickIN holder
PFERD felt polishing point, cyl. 15x20 mm, shaft diameter 6 mm with centre hole
CP pneumatic rod nail deruster CP7120 with chisel function