ATORN SC HSC 3D roughing cutter diameter 25.0x30x121mm, T3, r=2.5mm, HA shaft
Brand: ATORN
Surface: CALIDA Z
Length: 121 mm
Art.-no. 16651250
Manufacturer article no. 11201154
EAN 4050293272604
Application
For high-performance milling in aluminium with cutting values up to 1600 m/min.
Execution
- Solid carbide ultra-fine grain
- HA straight shank
- With clearance
- CALIDA Z high-performance coating (ZrCrN titanium-free)
- Defined cutting edge rounding
- Centre cutting
- Reinforced core
- Flat 7° twist
Advantage
- Extremely stable high-performance geometry
- Chip breaker for machining short chips
- Fast and reliable chip removal
- Also for long-chipping materials
- Wear protection through corner radius (torus)
Notes
The tools should be shrunk-in. A stable machine and firmly clamped parts are important.
Brand | ATORN |
Main EAN Code | 4050293272604 |
Manufacturer Part Number | 11201154 |
Cutting material | SC |
Surface | CALIDA Z |
Type | WF |
Number of cutting edges (Z) | 3 PCS |
Twist angle | 7° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 25 mm |
Cutting edge length | 30 mm |
Clearance length | 65 mm |
Length | 121 mm |
Clearance diameter | 24 mm |
Shank diameter | 25 mm |
Edge radius | 2.5 mm |
fz aluminium | 0.7 mm |
Gross Weight | 0.708 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 900-1100 | ⚫ | |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 1000-1300 | ⚫ | |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 900-1100 | ⚫ | |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 1000-1300 | ⚫ | |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 900-1100 | ⚫ | |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | - | |||
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 1000-1300 | ⚫ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | - | |||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | |||
| 3.10 Graphite | C8000 | <60 | - | |||
| 3.11 Composite materials | - | |||||
Last viewed
AMF forked clamps, 22 x 200 mm, DIN 6315 B
ORION thread plug gauge UNC 3/8 inch - 16 threads/inch class 2B
SATA Luftdüsenring SATAjet und GR-92 83303
ATORN SC TiAlSiN HPC hard drill 3xD Ø 16.0 mm x 16 mm x 115 mm HA external
Factory calibration for callipers 200–300 mm
RÖHM safety key, 10 mm, for chuck 160
ATORN solid carbide slotting cutter ultra T=2 0.25 mm shaft DIN 6535 HA ultra