ATORN SC TVC end mill 10x42x95 mm T4 HB shank 4xD RT Pro
Brand: ATORN
Surface: RockTec PRO
Length: 95 mm
Art.-no. 16950684
Manufacturer article no. 11264473
EAN 4066107012830
Application
The TVC end mills are optimally suited for processing with modern milling strategies. Cutting lengths of 3xD and 4xD, reinforced cores and specially developed chip breaker geometries allow for deep operating depths with maximum process reliability.
Execution
- Cutting material, Ultra Micro fine grain
- Cutting edge finish
- Straight shank in line with DIN 6535 HB
- Type H
- Centre cutting and edge protection chamfer
- Special chip breakers for short chips
- Uneven twist angle
- With RockTec PRO coating
Brand | ATORN |
Main EAN Code | 4066107012830 |
Manufacturer Part Number | 11264473 |
Cutting material | SC |
Surface | RockTec PRO |
Type | H |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 40° |
Tool holding device | HB parallel shank |
Construction length | Extra long |
Cutting edge diameter | 10 mm |
Cutting edge length | 42 mm |
Length | 95 mm |
Shank diameter | 10 mm |
fz hard 65 HRC | 0.07 mm |
Gross Weight | 0.108 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 120-200 | 0.085 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 120-200 | 0.085 | ⚫ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 80-150 | 0.085 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 60-130 | 0.085 | ⚫ | |
Last viewed
3 TESA digital vernier calipers 150 mm 0.01 mm TWIN-CAL, IP40, round depth gauge
BOSCH Kreissägeblatt 2608640651
ORION hand tap VS HSS A 2181 0° MF12 1.5 mm ISO 2 TH/BH 3xD
ACTION Kraftnuss 3/4 Zoll SW 11/4 Zoll DO65840108
BOSCH Schraubendreher 1600A02CV3
HAZET Abzieher Spanntiefe 150 mm Spannbereich 200 mm 2 Abzughaken
ORION SC-TiAlN cutt. insrt f. index. insert drill 11213-11217 10.5mm 130 degrees