ATORN SC TVC end mill 6x25x70 mm T4 HB shank 4xD RT Pro
Brand: ATORN
Surface: RockTec PRO
Length: 70 mm
Art.-no. 16950680
Manufacturer article no. 11264471
EAN 4066107012809
Application
The TVC end mills are optimally suited for processing with modern milling strategies. Cutting lengths of 3xD and 4xD, reinforced cores and specially developed chip breaker geometries allow for deep operating depths with maximum process reliability.
Execution
- Cutting material, Ultra Micro fine grain
- Cutting edge finish
- Straight shank in line with DIN 6535 HB
- Type H
- Centre cutting and edge protection chamfer
- Special chip breakers for short chips
- Uneven twist angle
- With RockTec PRO coating
Brand | ATORN |
Main EAN Code | 4066107012809 |
Manufacturer Part Number | 11264471 |
Cutting material | SC |
Surface | RockTec PRO |
Type | H |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 40° |
Tool holding device | HB parallel shank |
Construction length | Extra long |
Cutting edge diameter | 6 mm |
Cutting edge length | 25 mm |
Length | 70 mm |
Shank diameter | 6 mm |
fz hard 65 HRC | 0.05 mm |
Gross Weight | 0.028 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 120-200 | 0.055 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 120-200 | 0.055 | ⚫ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 80-150 | 0.055 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 60-130 | 0.055 | ⚫ | |
Last viewed
ORION internal lathe chisel, carbide, D4974 (ISO 9) square, 10mm x 10mm P25/30 R
ATORN thread cutting inserts, full profile 60° HW5615 11 (IR/IL) 0.35 ISO, right
FEIN Sägeblätter Durchmesser 100 mm VE 5 St 63502178050
Chip tilting container galvanised capacity 0.30 m³ LxWxH 1300x820x800 mm mm
ATORN hand tap VS HSSE nitrided A 352 0° M5 0.8 mm ISO2 D/S 3xD
MITUTOYO internal micrometer, 3-point digital 200–225 mm IP65 Ti alloy
ATORN SC torus milling cutter, extra-long, Ø 4.0 x 8 x 60 x 100 mm r0.3 T=4 RT52