ATORN SC TVC end mill, aluminium diameter 12.0 x 50 x 105 mm, t=4 HB shaft
Brand: ATORN
Surface: Uncoated
Length: 105 mm
Art.-no. 16859170
Manufacturer article no. 11263771
EAN 4050293417937
Application
The TVC end mills are optimally suited for processing with modern milling strategies. Cutting edge lengths of 3-5xD, reinforced cores and specially developed chip breaker geometries allow high working depths with maximum process reliability.
Execution
- solid carbide ultra-fine grain
- straight shank in line with DIN 6535 HB
- uncoated and polished
- centre cutting and edge protection chamfer
- uneven twist angle
Brand | ATORN |
Main EAN Code | 4050293417937 |
Manufacturer Part Number | 11263771 |
Cutting material | SC |
Surface | Uncoated |
Type | W |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 20° |
Tool holding device | HB parallel shank |
Construction length | Extra long |
Cutting edge diameter | 12 mm |
Cutting edge length | 50 mm |
Length | 105 mm |
Edge protection chamfer length | 0.24 mm |
Shank diameter | 12 mm |
fz aluminium | 0.18 mm |
Gross Weight | 0.142 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 400-800 | 0.16 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 250-600 | 0.16 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 400-625 | 0.16 | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 400-625 | 0.16 | |
Last viewed
ATORN SC torus mill. cutt. w/ HA shaft diameter 20.0 x 82 x 154 mm T=3 radius 3.0
ATORN high-perf. SC drill ULTRA M HPC 3xD 16.0 mm x 16 mm x 115 mm HB internal
ANKE workbench model 106 V 1500x700x850 mm, panel w. univ. coating, colour opt.
ATORN TC hammer drill bit T=4, 16.0 mm x 310 mm x 250 mm suitable for SDS-plus