ATORN SC drill bit type NE ULTRA N PRO 5xD with internal cooling dia. 4.4 mm
Brand: ATORN
Surface: ULTRA N PRO
Length: 74 mm
Art.-no. 11199044
Manufacturer article no. 11869506
EAN 4066107041175
Application
For HPC drilling in non-ferrous metals
Execution
- SC ULTRA N PRO high-performance drill bit
- 2 margins
- 4-facet point
- 30° spiral angle
- Straight main cutting edge
- Polished chip grooves
- Specially prepared cutting edges
Advantage
- Perfect chip breaking due to the sharp, specially prepared cutting edges
- The specially designed ULTRA N PRO coating prevents built-up edges
- Very good chip removal even in the case of long-chipping material due to the large and polished chip grooves
- Excellent drilled hole quality due to low friction coefficient
Brand | ATORN |
Cutting edge diameter | 4.4 mm |
Main EAN Code | 4066107041175 |
Manufacturer Part Number | 11869506 |
Tolerance of cutting edge diameter | m7 |
Cutting material | SC |
Surface | ULTRA N PRO |
Max. drilling depth (D) | 5xD |
Type | HPC ALU |
Coolant supply | Internal |
Tool holding device | HA parallel shank |
Angle of the tip | 130 Degree |
Shank diameter | 6 mm |
Chip flute length | 36 mm |
Length | 74 mm |
f aluminium | 0.18 mm/r |
Gross Weight | 0.023 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/U] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 350-370 | 0.13-0.25 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 380-400 | 0.14-0.26 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 190-210 | 0.11-0.23 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 210-230 | 0.12-0.24 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 210-230 | 0.11-0.23 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 260-280 | 0.12-0.24 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 100-120 | 0.10-0.21 | ⚫ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 70-80 | 0.10-0.21 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | - | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
Last viewed
ATORN countersink, 90°, HSSE TiAlN, unequal spiral pitch, 6.3 mm
ATORN screw tap HSSE C 371 40° M2.5 0.45 mm ISO2 S 2.5xD conv. P
ORION ceramic gauge block tolerance class 0 6.00 mm
ATORN open-end wrench plug-in tool SW16 for torque wrench 9x12 spec width 4.8 mm
ATORN thread inserts, metric, 60° pitch, 4.0-6.0 mm, American thread 60 degrees
HAZET pneumatic multi grinder 9033N-6
ORION twist drill N HSS-TiN, DIN 338, 12.5 mm x 151 mm x 101 mm, 118°
