ATORN SC drill bit type NE ULTRA N PRO 5xD with internal cooling dia. 9.5 mm
Brand: ATORN
Surface: ULTRA N PRO
Length: 103 mm
Art.-no. 11199095
Manufacturer article no. 11869557
EAN 4066107041687
Application
For HPC drilling in non-ferrous metals
Execution
- SC ULTRA N PRO high-performance drill bit
- 2 margins
- 4-facet point
- 30° spiral angle
- Straight main cutting edge
- Polished chip grooves
- Specially prepared cutting edges
Advantage
- Perfect chip breaking due to the sharp, specially prepared cutting edges
- The specially designed ULTRA N PRO coating prevents built-up edges
- Very good chip removal even in the case of long-chipping material due to the large and polished chip grooves
- Excellent drilled hole quality due to low friction coefficient
Brand | ATORN |
Cutting edge diameter | 9.5 mm |
Main EAN Code | 4066107041687 |
Manufacturer Part Number | 11869557 |
Tolerance of cutting edge diameter | m7 |
Cutting material | SC |
Surface | ULTRA N PRO |
Max. drilling depth (D) | 5xD |
Type | HPC ALU |
Coolant supply | Internal |
Tool holding device | HA parallel shank |
Angle of the tip | 130 Degree |
Shank diameter | 10 mm |
Chip flute length | 61 mm |
Length | 103 mm |
f aluminium | 0.4 mm/r |
Gross Weight | 0.082 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/U] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 350-370 | 0.36-0.50 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 380-400 | 0.37-0.52 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 190-210 | 0.34-0.45 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 210-230 | 0.36-0.47 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 210-230 | 0.34-0.45 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 260-280 | 0.36-0.47 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 100-120 | 0.32-0.43 | ⚫ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 70-80 | 0.32-0.43 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | - | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
Last viewed
TESATAST measuring probe, 1 mm diameter cemented carbide ball, type Y60/1W
BESSEY all-steel screw clamp 100 x 60 mm, bright zinc-plated with wooden handle
META plug-in rack CLIP 100, RAL 7035, 7 shelves, add-on shelf 3000x1000x400 mm
HOFE additional shelf 2,500x500 mm, steel panel
LESSMANN IBE micro-abrasive pipe brush, dia. 3.2 mm, sanding bristles AO G600
ATORN indexable insert CBN VNGA 160408 ABC H25-B-2
VARIOFIT fk-1200/AG st cyl truck f 1 40-50l st cylinder, toe plate WxD 255x260mm
ATORN indexable drilling insert SOLX 080308 ACS40D
AMF Doppelgabelschlüssel dünn 714D-5x5,5 Nummer 51367