ATORN SC end mill D 3.0 x 9 x 15 x 50mm, HA shaft 4 cutting edges, ULTRA MS
Brand: ATORN
Surface: ULTRA MS
Length: 50 mm
Art.-no. 16670210
Manufacturer article no. 11861028
EAN 4050293359527
Application
End mill for machining stainless steel, titanium alloy, nickel and copper alloys.
Execution
- ultra-fine grain cemented carbide
- HA straight shank
- with clearance
- high-performance ULTRA MS layer
- defined cutting edge rounding
- centre cutting
Advantage
- optimised, positive cutting geometry
- optimum chip removal and temperature resistance
- maximum service life thanks to ULTRA MS coating
Brand | ATORN |
Main EAN Code | 4050293359527 |
Manufacturer Part Number | 11861028 |
Cutting material | SC |
Surface | ULTRA MS |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 40° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 3 mm |
Cutting edge length | 9 mm |
Clearance length | 15 mm |
Length | 50 mm |
Clearance diameter | 2.8 mm |
Shank diameter | 6 mm |
fz stainless steel | 0.015 mm |
Gross Weight | 0.016 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 120-140 | ⚫ | |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 130-150 | ⚫ | |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 130-150 | ⚫ | |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 120-140 | ⚫ | |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 120-140 | ⚫ | |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | ||
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | ||
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | ||
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 60-80 | ⚫ | |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 60-80 | ⚫ | |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 60-80 | ⚫ | |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 60-80 | ⚫ | |
Last viewed
ATORN aluminium telescopic ladder 4x5 with wire bow joint
ORION SC-TiAlN cutt. insrt f. index. insert drill 11213-11217 35.5mm 130 degrees
MITUTOYO gauge block with test certificate, 1.23 mm, tolerance class 0, steel
ATORN solid carbide drill UNI TiAlNplus 3xD without IC 3.7 mm straight shank HB
ATORN twist drill bit VA HSSE TiAlNplus DIN 338 diameter 3.6 mm
HAKRO women's long-sleeved Mikralinar® polo shirt, white, size 6XL