ATORN SC end mill D 4.0 x 19 x 32 x 75mm, HA shaft 4 cutting edges, ULTRA MS
Brand: ATORN
Surface: ULTRA MS
Length: 75 mm
Art.-no. 16670330
Manufacturer article no. 11861397
EAN 4050293363210
Application
HPC end mill with uneven helical and uneven pitch for rough machining and finish machining of stainless steel, titanium alloy, nickel and copper alloys. The uneven helical pitch means that vibrations on the tool are reduced, which results in outstanding finished surfaces, while, at the same time, feed rates and cutting depths can be increased.
Execution
- ultra-fine grain cemented carbide
- with uneven helical and cutter distribution (35/38°)
- HA straight shank
- with clearance
- high-performance ULTRA MS layer
- with edge protection chamfer
- defined cutting edge rounding
- centre cutting
Advantage
- rough machining and finishing with just one tool
- optimum suitability for trochoidal milling
- HPC geometry for maximum feed rates and running smoothness
- suitable for large cutting depths
Brand | ATORN |
Main EAN Code | 4050293363210 |
Manufacturer Part Number | 11861397 |
Cutting material | SC |
Surface | ULTRA MS |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 35° |
Tool holding device | HA parallel shank |
Construction length | Long |
Cutting edge diameter | 4 mm |
Cutting edge length | 19 mm |
Clearance length | 32 mm |
Length | 75 mm |
Edge protection chamfer length | 0.1 mm |
Clearance diameter | 3.7 mm |
Shank diameter | 6 mm |
fz stainless steel | 0.015 mm |
Gross Weight | 0.026 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 120-140 | 0.025 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 130-150 | 0.025 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 130-150 | 0.025 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 120-140 | 0.03 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 120-140 | 0.03 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | ||
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | ||
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | ||
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 60-80 | 0.02 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 60-80 | 0.025 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 60-80 | 0.022 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 60-80 | 0.025 | ⚫ |
