ATORN SC high-feed milling cutter 4x2.5x16x57 mm r=0.4 T=4 HA RockTec PRO
Brand: ATORN
Surface: RockTec PRO
Length: 57 mm
Art.-no. 16952804
Manufacturer article no. 11264479
EAN 4050293747140
Application
High-feed milling cutter (HSC) with a short cutting edge for processing materials up to 65 HRC. Areas of application are in die and mould making, and in general mechanical engineering.
Execution
- Standard version
- Cutting material, Ultra Micro fine grain
- Centre cutting
- HA shaft in line with DIN 6535
- Clearance
- Type H
- With RockTec PRO coating
- Radius tolerance = +/- 0.01 mm
Advantage
- High material removal rate, high surface quality
- Good dimensional and geometric accuracy
- optimum chip removal and temperature resistance
- Optimised geometry for machining hard materials
- maximum service life thanks to RockTec PRO coating
Brand | ATORN |
EAN | 4050293747140 |
Manufacturer Part Number | 11264479 |
Cutting material | SC |
Surface | RockTec PRO |
Type | H |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 10° (right) |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 4 mm |
Cutting edge length | 2.5 mm |
Clearance length | 16 mm |
Length | 57 mm |
Clearance diameter | 3.6 mm |
Shank diameter | 6 mm |
Edge radius | 0.4 mm |
fz hard 65 HRC | 0.065 mm |
Harmonized System Code | 82077031 |
Product Group | 152 |
Gross Weight | 0.023 kg |
Last viewed
ORION thread go ring gauge DIN 2285-1 M 1.2 ISO 6h
Film thickness gauge, 0.001 mm scale interval, 0.1 mm revolution
ATORN SC mini radius cutter diameter 2.0 x 1.6 x 10 x 50 mm, HA shaft
TESA GT 21 elec. length meas. probe, -1.2/+3 mm, inst. length 61.5 mm, 1.0 N
Drawer, 330 mm/100 mm, full ext., 100 kg, RAL 7035/5010, for int.: 900x600mm
WERA socket 7 mm with 1/4 inch drive and screw retention function
KLW Standard workbench housing 2 doors, 2 drawers WS202N-2000M40-E2001
