ATORN SC mini-torus milling cutter, Ø 2.5 x 3.7 x 25 x 60 mm, HA shaft
Brand: ATORN
Surface: ULTRA MS
Length: 60 mm
Art.-no. 16672102
Manufacturer article no. 11861249
EAN 4050293361735
Application
High-precision miniature torus milling cutter with long neck for process reliability in machining stainless steels, titanium, nickel and cobalt alloys.
Execution
- Ultra-fine grain cemented carbide
- Tolerance: < diameter 0.7 mm = 0/-0.012 mm and < diameter 4 mm = 0/-0.020 mm
- Radius tolerance = 0/-0.010 mm
- Straight shank, HA
- With clearance
- High-performance layer, ULTRA MS
- Defined cutting edge rounding
- Centre cutting
Advantage
- Large selection of clearance lengths
- Best chip removal and temperature resistance
- Maximum service life due to ULTRA MS coating
Brand | ATORN |
Main EAN Code | 4050293361735 |
Manufacturer Part Number | 11861249 |
Cutting material | SC |
Surface | ULTRA MS |
Type | VA |
Number of cutting edges (Z) | 2 PCS |
Twist angle | 40° |
Tool holding device | HA parallel shank |
Construction length | Long |
Cutting edge diameter | 2.5 mm |
Cutting edge length | 3.7 mm |
Clearance length | 25 mm |
Length | 60 mm |
Clearance diameter | 2.4 mm |
Shank diameter | 4 mm |
Edge radius | 0.3 mm |
fz stainless steel | 0.017 mm |
Product Group | 1HK |
Gross Weight | 0.012 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 30-60 | 0.02 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 40-90 | 0.022 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 40-90 | 0.022 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 30-60 | 0.02 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 30-60 | 0.02 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | ||
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | ||
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | ||
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 30-40 | 0.021 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 30-60 | 0.021 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 40-120 | 0.028 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 30-60 | 0.021 | ⚫ |
Last viewed
ATORN SC TiAlSiN HPC hard drill 5xD 10.3 mm x 12 mm x 118 mm, HA shaft, no IC
ATORN SC TiAlSiN HPC hard drill 5xD 10.3 mm x 12 mm x 118 mm, HA shaft, with IC
ANKE workbench model 16 VX panel zinc sheet coating 1500x800x850 mm, colour opt.
ATORN SC mini-torus milling cutter, Ø 0.4 x 0.6 x 2 x 50 mm, HA shaft
ATORN SC mini torus cutter diameter 0.4x0.4x8x55mm r=0.05 T2 HA D4 ULTRA DC
ATORN SC mini-torus milling cutter, Ø 0.5 x 0.7 x 2 x 50 mm, HA shaft
ATORN SC Boring bar E08F SVXCL 05