ATORN SC radius cutter long TiAlSiN 1.5x2x80 mm clearance 1.44x4.0 mm
Brand: ATORN
Surface: RockTec PRO
Length: 80 mm
Art.-no. 16954302
Manufacturer article no. 11264095
EAN 4050293653243
Application
Radius milling cutter, long design, for machining materials up to 65 HRC, e.g. in dip cutting and mould construction.
Execution
- Cutting material, Ultra Micro fine grain
- cutting edge finish
- HA shaft in line with DIN 6535
- Clearance
- type H
- With RockTec PRO coating
- Radius tolerance = +/- 0.005 mm
Advantage
- optimum chip removal and temperature resistance
- Optimised geometry for machining hard materials
- maximum service life thanks to RockTec PRO coating
Brand | ATORN |
Main EAN Code | 4050293653243 |
Manufacturer Part Number | 11264095 |
Cutting material | SC |
Surface | RockTec PRO |
Type | H |
Number of cutting edges (Z) | 2 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Extra long |
Cutting edge diameter | 1.5 mm |
Cutting edge length | 2 mm |
Clearance length | 4 mm |
Length | 80 mm |
Clearance diameter | 1.44 mm |
Shank diameter | 6 mm |
fz hard 65 HRC | 0.015 mm |
Gross Weight | 0.016 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 120-200 | ⚪ | |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 120-200 | ⚪ | |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 80-150 | ⚫ | |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 60-130 | ⚫ | ||
Last viewed
ATORN manual deburring tool 90 degrees HSS T3 16.5 mm
MITUTOYO gauge block with test certificate, 1.23 mm, tolerance class 1, ceramic
ATORN SC radius cutter diameter 20.0 x 38 x 80 x 125 mm T=4 RT52
GESIPA hand riveting pliers, Flipper model
YOKOTA pneumatic impulse wrench YLA70E 3/8 inch without shut-off