ATORN Ultra SC VA roughing cutter short 12.0x16x73mm shank DIN 6535HB
Brand: ATORN
Surface: ULTRA
Length: 73 mm
Art.-no. 16849820
Manufacturer article no. 10910908
EAN 4050293092738
Application
Roughing cutter for universal machining.
Execution
- Solid carbide ultra-fine grain
- Straight shank in accordance with DIN 6535 HB
- Centre cutting
- With clearance
- ULTRA-coated
Brand | ATORN |
Main EAN Code | 4050293092738 |
Manufacturer Part Number | 10910908 |
Cutting material | SC |
Surface | ULTRA |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 45° |
Tool holding device | HB parallel shank |
Construction length | Short |
Cutting edge diameter | 12 mm |
Cutting edge length | 16 mm |
Clearance length | 26 mm |
Length | 73 mm |
Edge protection chamfer length | 0.2 mm |
Clearance diameter | 11.8 mm |
Shank diameter | 12 mm |
fz steel 1000 | 0.064 mm |
Gross Weight | 0.016 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 80-110 | 0.05 | ⚪ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 80-110 | 0.05 | ⚪ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 70-80 | 0.05 | ⚪ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 80-90 | 0.04 | ⚪ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 80-110 | 0.04 | ⚪ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 70-105 | 0.04 | ⚪ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 60-70 | 0.04 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 70-80 | 0.04 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 60-80 | 0.04 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 40-60 | 0.04 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 40-60 | 0.04 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 300-400 | 0.07 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 300-400 | 0.07 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 120-140 | 0.07 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 120-150 | 0.07 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 120-150 | 0.07 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 120-150 | 0.07 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | - | |||
| 3.08 Duroplast | Bakelit, Melamin | <150 | - | |||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | |||
| 3.10 Graphite | C8000 | <60 | - | |||
| 3.11 Composite materials | - | |||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 100-140 | 0.07 | ⚪ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 100-140 | 0.07 | ⚪ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 100-140 | 0.07 | ⚪ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 30-40 | 0.04 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 20-40 | 0.04 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 20-40 | 0.04 | ⚪ |
Last viewed
ATORN twist drill TLP HSSE, DIN 338, 4.0 mm x 75 mm x 43 mm, 130°
ORION HPC reamer, solid carbide TiALCN 0° diameter 8.03 mm H7
MILWAUKEE sabre saw blade 48005187 230 x 1.8 mm pack of 5
STAHLWILLE Schlagringschlüssel 4205 SW 24 mm L.160 mm 42050024
HALDER small nylon hammer, head diameter 30 mm, no recoil
ATORN T-sliding block steel M10 hole spacing 20 mm