ATORN chuck for solid drill bits HSK63 (ISO 12164) dia. 40 mm A=105 mm
Brand: ATORN
Art.-no. 23163103
Manufacturer article no. 22661007
EAN 4050293714227
Application
This chuck is used to clamp indexable insert solid drill bits that are fixed with two screws, similar to a surface chuck.
Execution
- Alloyed case-hardening steel, core tensile strength at least 950 N/mm²
- Case-hardened HRc 60 ± 2 (HV 700 ± 50), hardness depth 0.8 mm ± 0.2 mm, black oxide finish
- Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
- Max. concentricity < 0.005 mm
Notes
The previous standard DIN 69871 was superseded by ISO 12164.
Delivery
1x HSK63 or HSK100 solid drill chuck (ISO 12164)
 | |
Brand | ATORN |
Tool holding device | HSK 63 |
Form | A |
Clamping diameter (d) | 40 mm |
Outer diameter (D) | 60 mm |
Projecting length (A) | 105 mm |
Clearance length to collar (L2) | 76 mm |
Clamp in depth (L3) | 67 mm |
Coolant supply | Internal axial |
Balancing quality | G 2.5 at 25,000 rpm |
Last viewed
ORION end mill HSSE5 N, extra-long, 14.0 x 80 x 137 mm shaft DIN 1835B
META CLIP full wall frame RAL7035 light grey VW2 N frame 3000x400 mm RAL7035
PIG universal absorbent fleece in a set of rolls and holder
ATORN high-perf. SC ALU drill HPC 5xD 11.2 mm x 12 mm x 118 mm HA internal
HAZET Twin Turbo Fist impact wrench 9012PTT
ATORN hexagon socket 12 mm 3/8 inch DIN 3124
ATORN thread cutting insert 16ER9W HC5630
