ATORN countersink 4S 90° HSS TiAlN, extreme unequal pitch dia. 12.4 mm
Brand: ATORN
Surface: TiAlN plus
Length: 56 mm
DIN: 335
Art.-no. 11501251
Manufacturer article no. 12030093
EAN 4066107040109
Application
For producing 90° counterbores up to 1,000 N/mm².
Execution
- Four-edged design with extremely unequal pitch
- With three-flat shank
Advantage
- Up to 50 % faster countersinking
- Extremely smooth running
- Optimal countersinking pattern without chatter marks
- Much lower infeed force required
- Three-flat shank reduces spinning in the drill chuck
Brand | ATORN |
Main EAN Code | 4066107040109 |
Manufacturer Part Number | 12030093 |
Countersink angle | 90 Degree |
Cutting material | HSS |
Surface | TiAlN plus |
Number of cutting edges | 4 PCS |
Tool holding device | Parallel shank with three tightening surfaces |
Spot-facer diameter | 12.4 mm |
Tip diameter | 2.8 mm |
Shank diameter | 8 mm |
Length | 56 mm |
f steel 700 | 0.12 mm/r |
DIN | 335 |
Gross Weight | 0.021 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 30-40 | 0.12-0.14 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 30-40 | 0.12-0.14 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 30-35 | 0.12-0.14 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 30-35 | 0.12-0.14 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 20-25 | 0.09-0.12 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 10-25 | 0.09-0.12 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 6-15 | 0.09-0.12 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 7-12 | 0.09-0.12 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 8-25 | 0.09-0.12 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 3-12 | 0.09-0.12 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 4-15 | 0.09-0.12 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 60-100 | 0.12-0.18 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 30-70 | 0.12-0.18 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 30-50 | 0.12-0.14 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 30-60 | 0.12-0.14 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 50-100 | 0.12-0.18 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 50-100 | 0.12-0.18 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 20-60 | 0.12-0.18 | ⚫ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 20-60 | 0.12-0.18 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | - | ||
| 3.10 Graphite | C8000 | <60 | 20-30 | 0.12-0.18 | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 10-30 | 0.12-0.14 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 10-30 | 0.12-0.14 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 10-30 | 0.12-0.14 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 4-15 | 0.07-0.09 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 2-8 | 0.07-0.09 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 2-8 | 0.07-0.09 | ⚫ |
Last viewed
ATORN VDE snipe nose pliers, 200 mm, straight, 2-component grip
ATORN reamer HSSE T=6 B, 7-8° 10.0mm H7 x 168mm x 38mm MK DIN 208
Precision spirit level in case 160 mm sensit. 0.04 mm/m
TESA MICRO-HITE 600 with standard accessories and fine adjustment
Polyethylene film bag, press-down clos. thickn. 0.05 mm, dim. 160x220 mm
ATORN hexagon socket 7 mm 1/4 inch DIN 3124
TESTO 115i clamp thermometer measurement on pipes with a diameter of 6-35 mm