ATORN countersink, 60°, HSS, T=3, extremely unequal pitch, 8 mm, 3-flat shank
Brand: ATORN
Surface: TiN/ZrN
Length: 50 mm
DIN: 334
Art.-no. 11501220
Manufacturer article no. 10420334
EAN 4050293623727
Application
For producing 60° counterbores up to 1300 N/mm².
Execution
- Profile-ground triple-edge countersink with radial relief, with extremely uneven pitch
Advantage
- Radial relief ensures optimum chip breaking
- Uneven pitch ensures excellent surfaces without chatter marks and minimisation of cutting forces
- 3-sided shaft ensures very good power transmission and prevents the tool from spinning in the drill chuck or even in the cordless drill
Brand | ATORN |
Main EAN Code | 4050293623727 |
Manufacturer Part Number | 10420334 |
Countersink angle | 60 Degree |
Cutting material | HSS |
Surface | TiN/ZrN |
Number of cutting edges | 3 PCS |
Tool holding device | Parallel shank with three tightening surfaces |
Spot-facer diameter | 8 mm |
Tip diameter | 2 mm |
Shank diameter | 6 mm |
Length | 50 mm |
f steel 700 | 0.1 mm/r |
DIN | 334 |
Gross Weight | 0.014 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 30-40 | 0.08-0.12 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 30-40 | 0.08-0.12 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 30-35 | 0.08-0.12 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 30-35 | 0.08-0.12 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 20-25 | 0.06-0.09 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 10-25 | 0.06-0.09 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 6-15 | 0.06-0.09 | ⚪ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 7-12 | 0.06-0.09 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 8-25 | 0.06-0.09 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 3-12 | 0.06-0.09 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 4-15 | 0.06-0.09 | ⚪ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 60-100 | 0.1-0.12 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 30-70 | 0.1-0.12 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 30-50 | 0.08-0.12 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 30-60 | 0.08-0.12 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 50-100 | 0.1-0.12 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 50-100 | 0.1-0.12 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 20-60 | 0.1-0.12 | ⚫ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 20-60 | 0.1-0.12 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | - | ||
| 3.10 Graphite | C8000 | <60 | 20-30 | 0.1-0.12 | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 10-30 | 0.08-0.12 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 10-30 | 0.08-0.12 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 10-30 | 0.08-0.12 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 4-15 | 0.04-0.07 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 2-8 | 0.04-0.07 | |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 2-8 | 0.04-0.07 | |
Last viewed
BOSCH Sägeblatt für Säbelsäge 2607018010
AMF Senkrechtspanner mit rotem Handgriff und 6803S-4 Nummer 90373
QUICK knurl cutter, HSSE-PM, DIN 82 RGE 45°, left, 21.5 mm, 1 mm, Unidur
ATORN twist drill X HSSE-PM TIN, DIN 338, 8.8 mm x 125 mm x 81 mm, 118°
ORION twist drill N HSS-TiN, DIN 338, 6.1 mm x 101 mm x 63 mm, 118°
GEDORE open-end slogging wrench 46 mm DIN 7444
ORION twist drill type H, CC, 4xD 8037, 3.8 mm x 56 mm x 25 mm, 118°
WIDIA TOP drill M1 removable disc solid carbide TiAIN diameter 8.0 mm W10
