ATORN countersink, 90°, SC, T=3, 16.5 x 60 mm, DIN similar to 335 shape C
Brand: ATORN
Surface: Uncoated
Length: 60 mm
DIN: 335 similar
Art.-no. 11500260
Manufacturer article no. 10644109
EAN 4050293069372
Application
For producing 90° counterbores up to 1300 N/mm².
Execution
- profile-ground triple-edge countersink with radial relief
Advantage
- radial relief ensures optimum chip breaking
- solid carbide cutting material for high service life requirements
Notes
Diameter 6-8.3 mm = solid carbide Diameter 10-31 mm = solid carbide head and steel shank
Brand | ATORN |
Main EAN Code | 4050293069372 |
Manufacturer Part Number | 10644109 |
Countersink angle | 90 Degree |
Cutting material | SC |
Surface | Uncoated |
Number of cutting edges | 3 PCS |
Tool holding device | HA parallel shank |
Spot-facer diameter | 16.5 mm |
Tip diameter | 3.2 mm |
Shank diameter | 10 mm |
Length | 60 mm |
f steel 1300 | 0.12 mm/r |
DIN | 335 similar |
Gross Weight | 0.040 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 50-80 | 0.14-0.18 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 50-70 | 0.14-0.18 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 50-65 | 0.14-0.18 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 50-65 | 0.14-0.18 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 40-60 | 0.12-0.14 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 20-40 | 0.12-0.14 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 10-25 | 0.12-0.14 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 10-20 | 0.12-0.14 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 10-15 | 0.12-0.14 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 8-14 | 0.12-0.14 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 10-25 | 0.12-0.14 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 100-200 | 0.18-0.26 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 60-100 | 0.18-0.26 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 40-80 | 0.14-0.18 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 30-70 | 0.14-0.18 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 70-150 | 0.18-0.26 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 70-140 | 0.18-0.26 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 30-90 | 0.18-0.26 | ⚫ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 30-70 | 0.18-0.26 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 30-60 | 0.18-0.26 | ||
| 3.10 Graphite | C8000 | <60 | 30-60 | 0.18-0.26 | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 20-60 | 0.14-0.18 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 20-45 | 0.14-0.18 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 20-45 | 0.14-0.18 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 10-25 | 0.09-0.11 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 10-25 | 0.09-0.11 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 10-25 | 0.09-0.11 | ⚪ |
Last viewed
ATORN machinist's hammer 1,500 g with 3-component handle
Drawer, 360 mm/130 mm, full ext., 100 kg, RAL 7035/7016, for int.: 900x600mm
ORION thread go ring gauge DIN 2285-1 M 1.7 ISO 6g
Sliding-door cabinet H x W x D 1950 x 1000 x 600 mm, doors with viewing window
BOSCH Lanze F016800446
ANKE workb., model 120 V, panel w. zn. coatg. 2000 x 700 x 850 mm RAL 7035/5010