ATORN disposable SC milling cutter, 3 cutters, 10.0 mm, MF, D6535HB shaft
Brand: ATORN
Surface: Uncoated
Length: 50 mm
Art.-no. 16760100
Manufacturer article no. 10910618
EAN 4050293090239
Individual prices for customers after login
You need more information or have not found your desired product?
Application
For universal machining in all material groups. Regrinding this cutting mill is not economical. It is cheaper to use the tool down to the wear line and replace it with a new one.
Execution
- Solid carbide ultra-fine grain
- Straight shank pursuant to DIN 6535 HB
- Centre cutting
- Uncoated
Product information
CAD data (available after login)
Brand | ATORN |
Main EAN Code | 4050293090239 |
Manufacturer Part Number | 10910618 |
Cutting material | SC |
Surface | Uncoated |
Type | N |
Number of cutting edges (Z) | 3 PCS |
Twist angle | 30° |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 10 mm |
Cutting edge length | 13 mm |
Length | 50 mm |
Shank diameter | 10 mm |
fz steel 1000 | 0.063 mm |
Gross Weight | 0.015 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 90-100 | 0.05-0.055 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 90-100 | 0.05-0.055 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 70-90 | 0.05-0.055 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 70-80 | 0.05-0.055 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 60-70 | 0.05-0.055 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 55-70 | 0.05-0.055 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 40-50 | 0.05-0.055 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 50-60 | 0.03-0.035 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 60-80 | 0.05-0.055 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 30-60 | 0.05-0.055 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 40-50 | 0.03-0.035 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 400-500 | 0.06-0.08 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 400-500 | 0.06-0.08 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 100-130 | 0.04-0.06 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 100-130 | 0.04-0.06 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 150-200 | 0.04-0.06 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 100-120 | 0.04-0.06 | ⚫ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 140-150 | 0.04-0.06 | ⚫ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 100-120 | 0.04-0.06 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 80-100 | 0.04-0.06 | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 80-120 | 0.05-0.06 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 80-120 | 0.05-0.06 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 80-120 | 0.05-0.06 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 35-50 | 0.02-0.03 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 30-40 | 0.02-0.03 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 30-40 | 0.02-0.03 | ⚪ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 20-40 | 0.03-0.035 | |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 20-40 | 0.03-0.035 | ||
