ATORN end mill HSSE PM TiAlN, 14.0 mm, TYPE NR, DIN 844 short

Name: ATORN end mill HSSE PM TiAlN, 14.0 mm, TYPE NR, DIN 844 short
Brand: ATORN
SKU: 15269140

Brand: ATORN

Surface: TiAlN

Length: 83 mm

Art.-no. 15269140

Manufacturer article no. 11230042

EAN 4050293128277

All versions

Manufacturer information

Specification

Application

Roughing cutter for universal machining in a wide range of materials.

Execution

HSSE PM
TiAIN-coating for maximum service life
Straight shank according to DIN 1835 B
Type NRF
Fine roughing teeth

Technical information

Brand	ATORN
EAN	4050293128277
Manufacturer Part Number	11230042
Cutting material	HSSE-PM
Surface	TiAlN
Type	NRF
Number of cutting edges (Z)	5 PCS
Twist angle	30°
Edge protection chamfer length	0.2 mm
Tool holding device	HB parallel shank
Construction length	Normal
Cutting edge diameter	14 mm
Cutting edge length	26 mm
Length	83 mm
Shank diameter	12 mm
fz steel 700	0.1 mm
Harmonized System Code	82077031
Product Group	118
Gross Weight	0.074 kg

Material groups for cutting values	Description regarding DIN	Strength Class [N/mm²]	Material No.	Vc [m/min]	fz [mm/T] at diameter	Suitability
1.00 Steels
1.01 Free machining steel	9 S 20	< 900	1.0711	80-90	0.09-0.1	⚫
1.02 Structural steel	ST 37-2	<500	1.0037	80-90	0.09-0.1	⚫
1.03 Structural steel	ST 60-2	> 500	1.7735	60-70	0.09-0.1	⚫
1.04 Heat-treated steel	42 CrMo 4	<1000	1.7225	50-60	0.09-0.1	⚫
1.05 Cast iron	GS-45	<1000	1.0446	40-45	0.075-0.095	⚫
1.06 Case-hardened steel	16 MnCr 5	<1200	1.7131	50-60	0.075-0.095	⚫
1.07 Ferritic/martensitic stainless steel	X 10 Cr 13	<1100	1.4006	40-45	0.075-0.095	⚫
1.08 Heat-treated steel	43 CrMo 4	>1000	1.3563	35-40	0.075-0.095	⚫
1.09 Nitriding steel	31 CrMoV 9	<1300	1.8519	30-40	0.075-0.095	⚫
1.10 Tool steel	X 38 CrMoV 5 1	<1300	1.2343	30-35	0.075-0.095	⚫
2.00 Stainless steels
2.01 Austenitic stainless steel	G-X 2 CrNiMo 18 15	<1100	1.3953	40-45	0.075-0.095	⚪
3.00 Non-ferrous metals
3.01 Long-chipping aluminium	AI99.9	<500	3.0305	200-450	0.09-0.1	⚪
3.02 Short-chipping aluminium	G-AISi12	<500	3.2581	120-140	0.09-0.1	⚪
3.03 Copper alloy bronze, long-chipping	CuSn4	<1200	2.1016	60-80	0.075-0.095	⚪
3.04 Copper alloy bronze, short-chipping	CuNi12Zn24	<850	2.0730	60-80	0.075-0.095	⚪
3.05 Copper alloy brass, long-chipping	Cu Zn 20	<600	2.0250	100-120	0.09-0.1	⚪
3.07 Thermoplastic	Cu Zn 39 Pb 3	<600	2.0381	80-90	0.09-0.1	⚪
3.07 Thermoplastic	PVC, Acrylglas	<100		160-180	0.09-0.1	⚪
3.08 Duroplast	Bakelit, Melamin	<150		100-120	0.09-0.1	⚪
3.09 Fibre-reinforced plastics	CFK, GFK	<1500		100-120	0.09-0.1
3.10 Graphite	C8000	<60		-	-
3.11 Composite materials				-	-
4.00 Cast metal
4.01 Grey cast iron	GG10	<260 HB	0.6010	60-90	0.085-0.12	⚪
4.02 Spheroidal graphite iron	GGG 40	<310 HB	0.7040	60-90	0.085-0.12	⚪
4.03 Ductile iron	GTW-55	<280 HB	0.8055	60-90	0.085-0.12	⚪
5.00 Special alloys
5.01 Titanium alloy	TiAI5Sn2,5	<1200	3.7115	15-30	0.05-0.06	⚪
5.02 Nickel-based alloy	NiCr21Mo	<1400	2.4858	15-30	0.05-0.06	⚪
5.03 Super alloys	X45CrSi 9 3	<1400	1.4718	10-30	0.05-0.06	⚪