ATORN end mill PM TiAlN, teeth = 5, 25.0 mm, type HR, DIN 1835B long shank
Brand: ATORN
Surface: TiAlN
Length: 166 mm
Art.-no. 15319250
Manufacturer article no. 11230067
EAN 4050293128697
Application
Roughing cutter for universal machining.
Execution
- HSSE PM
- Roughing teeth
- Centre cutting
- TiAIN-coating for maximum service life
- Straight shank according to DIN 1835 B
Brand | ATORN |
Main EAN Code | 4050293128697 |
Manufacturer Part Number | 11230067 |
Cutting material | HSSE-PM |
Surface | TiAlN |
Type | HR |
Number of cutting edges (Z) | 5 PCS |
Twist angle | 30° |
Edge protection chamfer length | 0.2 mm |
Tool holding device | HB parallel shank |
Construction length | Long |
Cutting edge diameter | 25 mm |
Cutting edge length | 90 mm |
Length | 166 mm |
Shank diameter | 25 mm |
fz steel 700 | 0.13 mm |
Product Group | 118 |
Gross Weight | 0.529 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 80-90 | 0.12-0.15 | ⚪ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 80-90 | 0.12-0.15 | ⚪ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 60-70 | 0.12-0.15 | ⚪ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 50-60 | 0.12-0.15 | ⚪ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 40-45 | 0.11-0.12 | ⚪ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 50-60 | 0.11-0.12 | ⚪ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 40-45 | 0.11-0.12 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 35-40 | 0.11-0.12 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 30-40 | 0.11-0.12 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 30-35 | 0.11-0.12 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 40-45 | 0.11-0.12 | ⚪ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 200-450 | 0.12-0.15 | |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 120-140 | 0.12-0.15 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 60-80 | 0.11-0.12 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 60-80 | 0.11-0.12 | |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 100-120 | 0.12-0.15 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 160-180 | 0.12-0.15 | ⚪ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 80-90 | 0.12-0.15 | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 100-120 | 0.12-0.15 | ⚪ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 100-120 | 0.12-0.15 | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 60-90 | 0.15-0.2 | ⚪ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 60-90 | 0.15-0.2 | ⚪ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 60-90 | 0.15-0.2 | ⚪ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 15-30 | 0.008-0.01 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 15-30 | 0.07-0.09 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 10-30 | 0.07-0.09 | ⚪ |
Last viewed
ATORN screw tap HSSE D 371 15° (left) M10 1.5mm ISO2 D≤3xD des. P
ATORN saw belt UNI MAX 10° M42 54x1.60 mm 0.75/1.25 teeth per inch
ATORN bandsaw blade for welding, bimetal UNI MAX 10° M42 34 1.1 4/6
AKASEL AKA-STICK POLY diamond stick, 9 µm, 20 ml
Shrink-fit chuck HSK63 (ISO 12164) dia. 16 mm A=95 mm
BOSCH Expert SDS plus-7X hammer drill bit 3.5x50x115 mm
