ATORN force sensor D2, meas. range, force 25 kN, nominal value 2 mV/V w TEDS

Name: ATORN force sensor D2, meas. range, force 25 kN, nominal value 2 mV/V w TEDS
Brand: ATORN
SKU: 44181585

Brand: ATORN

Material: Steel, stainless

Art.-no. 44181585

Manufacturer article no. 41615029

EAN 4050293715392

All versions

Manufacturer information

Specification

Application

Electric force sensors in the D2 model series are suitable for static and dynamic compressive force measurements in harsh environments. The ball-shaped pressure piece ensures correct force input and thus achieves excellent measurement results.

Execution

Robust design made of stainless steel, hermetically welded
Incl. TEDS module (electronically stored data sheet)
Pre-assembled with 3-m cables and connector configuration according to ATORN display unit ZD3
High degree of accuracy
Incl. factory calibration certificate

Advantage

Force sensor is automatically detected by the ATORN display unit ZD3
All relevant data is loaded from the TEDS module into the ATORN display unit ZD3, thus no additional settings are required on the display unit
If replacement is required, the measuring instrument does not need to be sent in

Notes

TEDS = Transducer Electronic Data Sheet according to IEEE 1451.4. An electronic data sheet stored in the force sensor, which contains all relevant data.

Delivery

Force sensor with 3-m connection cable and measuring instrument plug, factory calibration certificate

Technical information

Brand	ATORN
Model	D2
Design	TEDS module integrated
Min./max. force of measuring range	0-25 kN
Outer diameter	82 mm
Overall height	44 mm
Height of force transducers until piston	30 mm
Piston diameter	21.5 mm
Protruding piston height	14 mm
Fastening thread	M8
Sensitivity of force sensor	2 mV/V
Max. supply voltage	15 V
Min./max. nominal range of the supply voltage	5-10 V
Rated output	2 mV
Zero signal when mounted	0.02 mV
Relative characteristic value deviation	≤± 0.100 %
Relative linearity deviation	≤± 0.050 %
Relative span in unchanged installation position	≤± 0.080 %
Composed error	≤± 0.080 %
Material	Steel, stainless
IP protection class	IP 68
Cable length	3 m

Documents/CAD data

Product information

METZLER Catalogue

CAD data (available after login)

Certificates/ Documents

Accessory

Additional accessory:

Product

Description

Quantity

Price per

Price

ATORN display unit without encoder for the use of an external force sensor

Handheld tensioning and compression force testers without encoder

ATORN

Art.-no. 44181400

x 1 Piece

The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)

In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.