ATORN high-perf. drill, SC TiAlN, HPC 25xD 4.8 mm x 6 mm x 180 mm HA internal
Brand: ATORN
Surface: TiAlN
Length: 180 mm
Art.-no. 11189248
Manufacturer article no. 10912747
EAN 4050293386707
Application
For HPC deep-hole boring up to a strength of 1300 N/mm².
Execution
- High-performance deep hole drill, solid carbide TiAlN
- 4 drill heels
- Four grinding faces
- 30° spiral angle
- Straight main cutting edge
Advantage
- very good all-round properties and precise cutting performance with high cutting rates
- unique, extremely hard, low-friction, temperature-resistant and form-fitting TiAlN coating ensures a longer service life
- Cutting edge preparation minimises micro-fractures on the cutter
- the entire range is coordinated in terms of angle and diameter
Brand | ATORN |
Cutting edge diameter | 4.80 mm |
Main EAN Code | 4050293386707 |
Manufacturer Part Number | 10912747 |
Tolerance of cutting edge diameter | h7 |
Cutting material | SC |
Surface | TiAlN |
Max. drilling depth (D) | 25xD |
Type | HPC UNI |
Coolant supply | Internal |
Tool holding device | HA parallel shank |
Angle of the tip | 135 Degree |
Shank diameter | 6 mm |
Chip flute length | 135 mm |
Length | 180 mm |
f steel 1000 | 0.08 mm/r |
Gross Weight | 0.054 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 70-110 | 0.08-0.1 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 70-110 | 0.08-0.1 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 80-110 | 0.08-0.1 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 70-100 | 0.08-0.1 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 70-90 | 0.08-0.09 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 60-100 | 0.08-0.09 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 40-60 | 0.08-0.09 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 45-70 | 0.08-0.09 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 45-80 | 0.08-0.09 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 50-90 | 0.08-0.1 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 30-60 | 0.08-0.09 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 170-250 | 0.095-0.12 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 120-190 | 0.095-0.12 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 100-150 | 0.085-0.1 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 100-130 | 0.085-0.1 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 130-190 | 0.095-0.12 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 40-80 | 0.095-0.12 | ||
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 130-190 | 0.095-0.12 | ⚪ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 40-60 | 0.095-0.12 | ||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 40-60 | 0.085-0.1 | ||
| 3.10 Graphite | C8000 | <60 | 90-110 | 0.085-0.1 | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 70-100 | 0.085-0.1 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 70-100 | 0.085-0.1 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 70-100 | 0.085-0.1 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 20-30 | 0.065-0.075 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 20-30 | 0.065-0.075 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 20-30 | 0.065-0.075 | ⚪ |
Last viewed
ATORN high-perf. drill, SC TiAlN, HPC 25xD 9.5 mm x 10 mm x 310 mm HA internal
ATORN solid carbide drill UNI TiAlNplus 12xD with IC 9.0 mm
ATORN screw tap HSSE-PM ULTRA HL B 0° UNC1/4-20
ATORN high-perf. SC drill ULTRA M HPC 3xD 10.1 mm x 12 mm x 102 mm HB internal
BERNSTEIN ESD tweezers, chisel-shaped tips 130 mm
BISON 3-jaw lathe chuck, steel, diameter 200 mm, DIN 6350 3504-200
