ATORN pull stud DIN 69872 B SK40, without hole
Brand: ATORN
Length: 54 mm
DIN: 69872
Art.-no. ZA23692140
Manufacturer article no. 20800003
EAN 4050293200638
Application
For tools with steep taper in accordance with ISO 7388-1 (former standard was DIN 69871) and ISO 7388-2 (old standard was JIS B 6339 MAS-BT).
Execution
- All pull studs made from material 16Mn Cr5
- Case-hardened HRc 58 ± 2
- Thread and bore hole soft, black oxide and polished
- Pull studs with O-ring = sealed
Notes
Further versions available on request (specification of machine types required).
Delivery
1x SK pull stud ISO 7388-1
 | |
Brand | ATORN |
EAN | 4050293200638 |
Manufacturer Part Number | 20800003 |
Suitable for tool holding device | SK 40 |
Form | B |
Outer diameter (D1) | 19 mm |
Bolt diameter (D2) | 14 mm |
Diameter (D) | 17 mm |
Suitable for screw thread (d5) | M16 |
Length (L) | 54 mm |
Coolant supply | No |
Angle (α/ A) | 15 Degree |
Length of tenon (L1) | 26 mm |
DIN | 69872 |
Harmonized System Code | 84662098 |
Gross Weight | 0.081 kg |
Last viewed
ATORN hard. reference plate, hardness value approx. 100 HV 2 75x75x16mm square
ATORN SC HSC single-tooth milling cutter diameter 4.0 mm W0° 75 x 20 t=1 d=6h6
SCANGRIP connector for MAKITA 18 V battery pack
HAZET Punch pliers 1964-70 7 mm
ATORN insert holder AME-R-40 AMR-06-S-T25
ATORN SC HSC end mill, T=4, 8.0 mm, DIN 6535HA TiAlN shank, L=19
ATORN SC end mill D 8.0 x 26 x 40 x 75mm, HB shaft 4 cutting edges, ULTRA MS
UVEX safety goggles with frame pheos CX2
