ATORN shrink-fit chuck SK40 (ISO 7388-1) dia. 32 mm A=160 mm
Brand: ATORN
DIN: 69871-1
Art.-no. 23424232
Manufacturer article no. 21041038
EAN 4050293357714
Application
For clamping cutters and drills with straight shanks in h6 tolerance. Suitable for shrinking onto inductive contact and hot air devices.
Execution
- Guarantees maximum concentricity < 0.003 mm
- Heat-resistant and high-temperature tool steel 1,600-1,800 N/mm²
- Hardness 52 + 2 HRC
- Maximum coolant pressure 80 bar
- Adjustment travel 10 mm, can be adjusted on both sides
- Shrink grip and shrink release of carbide and HSS tools
- 4 additional drill holes for fine balancing
- With Balluff chip hole
Advantage
- High positioning and repeat accuracy
- Shrink-fit chuck ideal for high rotation speeds
- Slim design, narrow interfering contour
- Very high torque transfer
- Extremely cost-effective
Notes
The previous standard DIN 69871-1 was replaced by ISO 7388-1.
Delivery
1x SK40 shrink-fit chuck (ISO 7388-1)
 | |
Brand | ATORN |
Tool holding device | SK 40 |
Clamping diameter (d) | 32 mm |
Projecting length (A) | 160 mm |
Tapered diameter (d2) | 44 mm |
Outer diameter (D) | 53 mm |
Clamp in depth (min. L2) | 62 mm |
Form | AD/AF |
Concentricity tolerance | 0.003 mm |
Suitable for thread (G) | M16 x 1 |
Coolant supply | Internal |
Balancing quality | G 2.5 at 25,000 rpm |
DIN | 69871-1 |
Last viewed
ATORN indexable insert, positive, CCGT 120408-MN HC6310
GEDORE double open-end wrench 19 x 22 mm DIN 3110
ATORN solid carbide torus milling cutter, UHPC 16.0 x 92 mm, R1.0, T4, HB shaft
Drawer, 210 mm/100 mm, full ext., 100 kg, colour opt. for 800 S int.: 600x700 mm
BILZ vibration-damped extension LNE-MH16-250-K1-Z3200
ATORN thread cutting insert 11IR0.8ISO HC5515
ATORN SC radius cutter diameter 8.0 x 12 x 30 x 64 mm T=4 RT52
