ATORN solid carbide HPC end mill Z4 HA shaft diameter 5.0 x 10 x 57 mm
Brand: ATORN
Surface: ULTRA N PRO
Length: 57 mm
Art.-no. 16665610
Manufacturer article no. 12040755
EAN 4050293628036
Application
HPC end mill with variable pitch and variable twist for roughing and finishing non-ferrous metals with maximum results.
Execution
- solid carbide ultra-fine grain
- straight shank in line with DIN 6535 HB
- ULTRA-N PRO-coated
- with edge protection chamfer
- Defined edge rounding of the cutting edge
- centre cutting
- with clearance
- Polish sanding
Advantage
- Ultra-smooth coating thickness
- Excellent chip removal
- defined edge rounding for maximum service life
- Large chip area for optimum chip flow
- Ideal for NF metals and plastics
Brand | ATORN |
Main EAN Code | 4050293628036 |
Manufacturer Part Number | 12040755 |
Cutting material | SC |
Surface | ULTRA N PRO |
Type | W |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 43° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 5 mm |
Cutting edge length | 10 mm |
Clearance length | 16 mm |
Length | 57 mm |
Edge protection chamfer length | 0.1 mm |
Clearance diameter | 4.9 mm |
Shank diameter | 6 mm |
fz aluminium | 0.065 mm |
Gross Weight | 0.020 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 520-550 | 0,0450 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 520-550 | 0,0450 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 340-360 | 0,0360 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 250-280 | 0,0360 | ||
Last viewed
SUBITO fixed cemented carbide measuring pin for 160.0-290 mm, 200.0 mm
Drawer, 330 mm/130 mm, full ext., 200 kg, colour opt. for 800 B int.: 900x700 mm
YOKOTA pneumatic impulse wrench YLA90E 3/8 inch without shut-off
ATORN solid carbide drill UNI TiAlNplus 3xD without IC 6.4 mm straight shank HB
CP pneumatic random orbital sander CP7255CVE