ATORN solid carbide drill UNI TiAlNplus 5xD with IC 18.9 mm straight shank HB
Brand: ATORN
Surface: TiAlN plus
Length: 153 mm
DIN: 6537
Art.-no. 11105389
Manufacturer article no. 10915205
EAN 4050293527674
Application
for HPC boring up to a strength of 1300 N/mm²
Execution
- solid carbide TiAlNplus high-performance drill
- 2 drill heels
- Cone polished section
- 30° spiral angle
- Straight main cutting edge
Advantage
- Economic drilling in a wide variety of materials with high cutting values
- Newly developed geometry in conjunction with a multi-layer coating individually tailored to drilling ensures significantly longer service lives
- Cutting edge finishing reduces micro-fractures and increases the service life
Brand | ATORN |
Cutting edge diameter | 18.90 mm |
Main EAN Code | 4050293527674 |
Manufacturer Part Number | 10915205 |
Tolerance of cutting edge diameter | h7 |
Cutting material | SC |
Surface | TiAlN plus |
Max. drilling depth (D) | 5xD |
Type | HPC UNI |
Coolant supply | Internal |
Tool holding device | HB parallel shank |
Angle of the tip | 140 Degree |
Shank diameter | 20 mm |
Chip flute length | 101 mm |
Length | 153 mm |
f steel 1000 | 0.36 mm/r |
DIN | 6537 |
Gross Weight | 0.456 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 100-140 | 0.34-0.38 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 100-140 | 0.34-0.38 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 95-135 | 0.34-0.38 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 85-110 | 0.32-0.37 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 70-110 | 0.32-0.37 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 80-120 | 0.34-0.38 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 40-70 | 0.20-0.25 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 40-85 | 0.20-0.25 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 85-100 | 0.20-0.25 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 35-85 | 0.20-0.25 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 40-60 | 0.20-0.25 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 200-300 | 0.37-0.40 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 180-220 | 0.37-0.40 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 100-150 | 0.32-0.35 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 120-180 | 0.32-0.35 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 160-190 | 0.32-0.35 | ⚪ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 250-280 | 0.32-0.35 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 30-100 | 0.26-0.35 | ⚪ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 30-80 | 0.26-0.35 | ⚪ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 30-70 | 0.26-0.35 | ||
| 3.10 Graphite | C8000 | <60 | 85-130 | 0.23-0.38 | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 85-130 | 0.40-0.46 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 70-110 | 0.30-0.38 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 70-110 | 0.30-0.38 | ⚫ |
Last viewed
MITUTOYO callipers for pipe wall thickness digital ABS 0–6 inch IP67
ATORN wire end brush, dia. 10 x 40 mm, shank 6 mm, crimped V2A wire, 0.3 mm
ANKE workbench, mod. 103 V, panel solid beech. 1500 x 700 x 900 mm
ATORN SC miniature ball nose end mill diameter 0.3x0.3x8x55 mm T2 HA 4 ULTRA DC
Wooden safety floor grid 1500 x 800 mm wedge, 3 sides
ORION collet Erickson DK20, diameter 3.0 mm