ATORN solid carbide end mill 4 cutters 2.0 mm shaft DIN 6535HA MF

Name: ATORN solid carbide end mill 4 cutters 2.0 mm shaft DIN 6535HA MF
Brand: ATORN
SKU: 16830020

Brand: ATORN

Surface: Uncoated

Length: 32 mm

Art.-no. 16830020

Manufacturer article no. 10910840

EAN 4050293092202

All versions

Manufacturer information

Specification

Application

End mill for universal machining.

Execution

solid carbide ultra-fine grain
straight shank in accordance with DIN 6535 HA
centre cutting
2-4 mm diameter without clearance
without edge protection chamfer

Technical information

Brand	ATORN
EAN	4050293092202
Manufacturer Part Number	10910840
Cutting material	SC
Surface	Uncoated
Type	N
Number of cutting edges (Z)	4 PCS
Twist angle	30°
Tool holding device	HA parallel shank
Construction length	Normal
Cutting edge diameter	2 mm
Cutting edge length	8 mm
Length	32 mm
Shank diameter	2 mm
fz steel 1000	0.02 mm
Harmonized System Code	82077010
Product Group	108
Gross Weight	0.002 kg

Material groups for cutting values	Description regarding DIN	Strength Class [N/mm²]	Material No.	Vc [m/min]	fz [mm/T] at diameter	Suitability
1.00 Steels
1.01 Free machining steel	9 S 20	< 900	1.0711	90-100	0.005-0.04	⚫
1.02 Structural steel	ST 37-2	<500	1.0037	90-100	0.005-0.04	⚫
1.03 Structural steel	ST 60-2	> 500	1.7735	70-90	0.005-0.04	⚫
1.04 Heat-treated steel	42 CrMo 4	<1000	1.7225	70-80	0.005-0.04	⚫
1.05 Cast iron	GS-45	<1000	1.0446	60-70	0.005-0.04	⚫
1.06 Case-hardened steel	16 MnCr 5	<1200	1.7131	55-70	0.005-0.04	⚫
1.07 Ferritic/martensitic stainless steel	X 10 Cr 13	<1100	1.4006	40-50	0.005-0.04	⚫
1.08 Heat-treated steel	43 CrMo 4	>1000	1.3563	50-60	0.005-0.02	⚫
1.09 Nitriding steel	31 CrMoV 9	<1300	1.8519	60-80	0.005-0.04	⚫
1.10 Tool steel	X 38 CrMoV 5 1	<1300	1.2343	30-60	0.005-0.04	⚫
2.00 Stainless steels
2.01 Austenitic stainless steel	G-X 2 CrNiMo 18 15	<1100	1.3953	40-50	0.005-0.02	⚫
3.00 Non-ferrous metals
3.01 Long-chipping aluminium	AI99.9	<500	3.0305	400-500	0.01-0.04	⚪
3.02 Short-chipping aluminium	G-AISi12	<500	3.2581	400-500	0.01-0.04	⚫
3.03 Copper alloy bronze, long-chipping	CuSn4	<1200	2.1016	100-130	0.01-0.02	⚪
3.04 Copper alloy bronze, short-chipping	CuNi12Zn24	<850	2.0730	100-130	0.01-0.02	⚫
3.05 Copper alloy brass, long-chipping	Cu Zn 20	<600	2.0250	150-200	0.01-0.02	⚪
3.07 Thermoplastic	Cu Zn 39 Pb 3	<600	2.0381	140-150	0.01-0.02	⚫
3.07 Thermoplastic	PVC, Acrylglas	<100		100-120	0.01-0.02	⚫
3.08 Duroplast	Bakelit, Melamin	<150		100-120	0.01-0.02	⚫
3.09 Fibre-reinforced plastics	CFK, GFK	<1500		80-100	0.01-0.02
3.10 Graphite	C8000	<60		-	-
3.11 Composite materials				-	-
4.00 Cast metal
4.01 Grey cast iron	GG10	<260 HB	0.6010	80-120	0.005-0.04	⚫
4.02 Spheroidal graphite iron	GGG 40	<310 HB	0.7040	80-120	0.005-0.04	⚫
4.03 Ductile iron	GTW-55	<280 HB	0.8055	80-120	0.005-0.04	⚫
5.00 Special alloys
5.01 Titanium alloy	TiAI5Sn2,5	<1200	3.7115	35-50	0.005-0.01	⚪
5.02 Nickel-based alloy	NiCr21Mo	<1400	2.4858	30-40	0.005-0.01	⚪
5.03 Super alloys	X45CrSi 9 3	<1400	1.4718	30-40	0.005-0.01	⚪
6.00 Hard materials
6.01 Hardened steel -55 HRC	x40CrMoV5-1	-55HRC	0.9620	20-40	0.005-0.02
6.02 Hardened steel -65 HRC	90MnCrV8	<65HRC		20-40	0.005-0.02