ATORN square end mill PM TiAlN, 7.0 mm, type W shank DIN 1835B T=3
Brand: ATORN
Surface: TiAlN
Length: 66 mm
Art.-no. 15158070
Manufacturer article no. 11230004
EAN 4050293127898
Application
End mill for universal use when plunge milling, groove milling and keyway cutting as well as face milling and peripheral milling. Optimised cutting material for unstable clamping conditions and increased service life.
Execution
- HSSE PM
- finishing teeth
- centre cutting
- TiAIN coating for maximum service life
- straight shank in accordance with DIN 1835 B
Brand | ATORN |
Main EAN Code | 4050293127898 |
Manufacturer Part Number | 11230004 |
Cutting material | HSSE-PM |
Surface | TiAlN |
Type | W |
Number of cutting edges (Z) | 3 PCS |
Twist angle | 45° |
Edge protection chamfer length | 0.1 mm |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 7 mm |
Cutting edge length | 16 mm |
Length | 66 mm |
Shank diameter | 10 mm |
fz aluminium | 0.068 mm |
Product Group | 118 |
Gross Weight | 0.035 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 80-90 | 0.03-0.065 | ⚪ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 80-90 | 0.03-0.065 | ⚪ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 60-70 | 0.03-0.065 | ⚪ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 50-60 | 0.03-0.065 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 40-45 | 0.03-0.052 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 50-60 | 0.03-0.052 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 40-45 | 0.03-0.052 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 35-40 | 0.03-0.052 | |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 30-40 | 0.03-0.052 | |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 30-35 | 0.03-0.052 | |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 40-45 | 0.03-0.052 | ⚪ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 200-450 | 0.03-0.065 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 120-140 | 0.03-0.065 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 60-80 | 0.03-0.052 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 60-80 | 0.03-0.052 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 100-120 | 0.03-0.065 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 160-180 | 0.03-0.065 | ⚪ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 80-90 | 0.03-0.065 | ⚪ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 100-120 | 0.03-0.065 | ⚪ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 100-120 | 0.03-0.065 | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 60-90 | 0.06-0.08 | ⚪ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 60-90 | 0.06-0.08 | ⚪ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 60-90 | 0.06-0.08 | ⚪ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 15-30 | 0.05-0.06 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 15-30 | 0.01-0.024 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 10-30 | 0.01-0.024 | |
Last viewed
ATORN NC reamer HSSE T=3 B 7-8° 2.13-2.36x 40x8mm HA sim. to DIN 212 opt. 0.01
ATORN SC mini end mill, long, diameter 3.0 x 4.5 x 8 x 50 mm T=2 RT65
ATORN end mill PM TiAlN D844B K HF, diameter 6.0 mm
ATORN hand tap HSS A/D/C 352 0 degrees M36 4mm ISO2 D/S≤3xD
Reducing sleeve dia. 20 mm/dia. 16 mm with coolant bores
