ATORN square end mill cutter PM TiAlN, DIN 844B, TYPE NR, 8.0 mm diameter
Brand: ATORN
Surface: TiAlN
Length: 69 mm
Art.-no. 15159080
Manufacturer article no. 11650023
EAN 4050293387667
Application
Universal end mill for plunge, groove and slot milling as well as for face and circumferential milling. Optimized cutting material for unstable clamping conditions and increased service life. Also suitable for milling with compressed air.
Execution
- HSSE PM
- Centre cutting
- Straight shank pursuant to DIN 1835 HB
- Roughing teeth
- TiAIN-coating for maximum service life
Brand | ATORN |
EAN | 4050293387667 |
Manufacturer Part Number | 11650023 |
Cutting material | HSSE-PM |
Surface | TiAlN |
Type | NR |
Number of cutting edges (Z) | 3 PCS |
Twist angle | 30° |
Edge protection chamfer length | 0.1 mm |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 8 mm |
Cutting edge length | 19 mm |
Length | 69 mm |
Shank diameter | 10 mm |
fz steel 700 | 0.078 mm |
Harmonized System Code | 82077031 |
Product Group | 118 |
Gross Weight | 0.035 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 80-90 | 0.01 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 80-90 | 0.01 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 60-70 | 0.01 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 50-60 | 0.01 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 40-45 | 0.01 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 50-60 | 0.01 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 40-45 | 0.01 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 35-40 | 0.01 | ⚪ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 30-40 | 0.01 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 30-35 | 0.01 | ⚪ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 40-45 | 0.01 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 200-450 | 0.01 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 120-140 | 0.01 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 60-80 | 0.01 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 60-80 | 0.01 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 100-120 | 0.01 | ⚪ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 80-90 | 0.01 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 160-180 | 0.01 | ⚪ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 100-120 | 0.01 | ⚪ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 100-120 | 0.01 | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 60-90 | 0.01 | ⚪ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 60-90 | 0.01 | ⚪ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 60-90 | 0.01 | ⚪ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 15-30 | 0.008 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 15-30 | 0.008 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 10-30 | 0.008 | ⚪ |
Last viewed
ORION countersink, 90°, HSSE-TiN, T=1, 10.0-15.0 mm, 67 x 10 mm
ATORN mini cutting insert APL 3.0mm R0.05 L15 HW5615 11.42
ATORN indexable insert, negative, CNMG 120408-FP HC7610
MITUTOYO 06AFM380E USB connecting cable, 2 m, round plug with 6 pins
H+S feeler gauge tape INOX steel 0.06 mm reel approx. 300 mm x 1 m
ATORN twist drill TLP HSSE-TiAlN, DIN 1897, 3.5 mm x 52 mm x 20 mm, 130°
ATORN centre drill set HSS form A, D=1-1.6-2-2.5-3.15-4-5
AUTOSTAT set - power cube with 8 grounding contacts and positioner
