ATORN surface chuck (Weldon) HSK100 (ISO 12164) dia. 32 mm A=130 mm
Brand: ATORN
Length: 101 mm
Art.-no. 23157683
Manufacturer article no. 22660084
EAN 4050293704990
Application
For clamping tools with a straight shank and clamping flat in accordance with DIN 1835 B.
Execution
- Alloyed case-hardening steel with a core tensile strength of at least 950 N/mm²
- Case-hardened HRc 60 ± 2 (HV 700 ± 50), hardness depth 0.8 mm ± 0.2 mm
- Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
- All functional surfaces are machined
- With Balluff chip hole
Notes
The previous standard DIN 69871 was superseded by ISO 12164.
Delivery
1x HSK63 or HSK100 surface chuck (Weldon) (ISO 12164)
 | |
Brand | ATORN |
Tool holding device | HSK 100 |
Clamping diameter (d) | 32 mm |
Projecting length (A) | 130 mm |
Length (L) | 101 mm |
Outer diameter (D) | 72 mm |
Coolant supply | Internal axial |
Balancing quality | G 2.5 at 25,000 rpm |
Last viewed
QUICK knurl cutter, HSSE-PM, DIN 82 RAA, left, 14.5mm, 0.6mm, uncoated
MULTIFIX change holder D CD 40170
WALTON extractor for screw taps with 4 flutes, M12 1/2 inch thread
METABO cordless straight grinder GA 18 LTX G - SOLO
RED ROOSTER flat chisel for Kango 460 mm CB2367
FEIN GSZ 4-90 EL straight grinder
WEICON spray adhesive, extra strong, 500 ml
AMF Horizontal clamp plus with black handle 68300T-4 Number 558000