ATORN test pin set rust- and acid-resistant TC1 9.01-10.0mm in 0.01mm increments

Name: ATORN test pin set rust- and acid-resistant TC1 9.01-10.0mm in 0.01mm increments
Brand: ATORN
SKU: 32471560

Brand: ATORN

Material: Stainless and acid proof steel

Length: 70 mm

DIN: 2269

Calibration Group: AE

Art.-no. 32471560

Manufacturer article no. 33061294

EAN 4066107103071

All versions

Manufacturer information

Specification

Application

For measuring bore spacings, bore diameters, angularity of bores etc.

Execution

ground and lapped
hardened 58-62 HRC
Rust- and acid-resistant steel
Diameter from 0.300 to 0.999 mm with a length of 40 mm; diameter from 1.000 mm with a length of 70 mm
diameter from 3.00 mm: One end with 30-45° chamfer; other end deburred with diameter marking on end face
diameter from 1.5 to 2.999 mm: One end with 30-45° chamfer; other end deburred with diameter marking on outer surface
diameter from 1.00 to 1.499 mm: One end with 30-45° chamfer; other end deburred without diameter marking
up to 0.999 mm: Both ends deburred, without diameter marking

Technical information

Brand	ATORN
EAN	4066107103071
Manufacturer Part Number	33061294
Min./max. diameter	9.01-10.00 mm
Tolerance class	1
Material	Stainless and acid proof steel
Length	70 mm
Type	in 0.01 mm increments
Number of pieces in assortment/set	100 PCS
Number of bins	2
Nominal dimension of measuring pins	9.01-10.00 mm, increasing by 0.01 mm
DIN	2269
Calibration Group	AE
Harmonized System Code	90318020
Product Group	3DD
Gross Weight	5.800 kg

Documents

Product information

METZLER Catalogue

Certificates/ Documents

Accessory

Additional accessory:

Product

Description

Quantity

Price per

Price

DAkkS calibration, test pin set, 1.001-10 mm, 100 pcs, option 1

AE calibration group for test pins

MELUTEC

Art.-no. 30003236

x 1 Piece

DAkkS calibration without sticker, test pin set, 1.001-10 mm, 100 pcs, option 1

AE calibration group for test pins

MELUTEC

Art.-no. 30005236

x 1 Piece

Factory calibration, test pin set, 1-10 mm, 100 pcs, option 1

AE calibration group for test pins

MELUTEC

Art.-no. 30000424

x 1 Piece

The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)

In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.