ATORN twist drill TLP HSS, DIN 1869, 6.5 mm x 215 mm x 150 mm, 130°
Brand: ATORN
Surface: Uncoated
Length: 215 mm
DIN: 1869
Art.-no. 11061122
Manufacturer article no. 10472336
EAN 4050293032611
Application
Geometry with deep-hole profile for application up to a strength of 1000 N/mm².
Execution
- Twist drill with deep-hole profile
Advantage
- Deep-hole profile to optimise chip removal at greater drilling depths without venting
- effective removal of chips thanks to large chipping spaces
Delivery
Packing unit: drill bit dia. 1.0-6.0 mm = 10 units (price per unit)
Brand | ATORN |
Main EAN Code | 4050293032611 |
Manufacturer Part Number | 10472336 |
Cutting material | HSS |
Surface | Uncoated |
Type | TLP |
Tool holding device | HA parallel shank |
Cutting edge diameter | 6.50 mm |
Angle of the tip | 130 Degree |
Chip flute length | 150 mm |
Length | 215 mm |
f steel 700 | 0.16 mm/r |
DIN | 1869 |
Gross Weight | 0.036 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 20-28 | 0.06-0.2 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 20-28 | 0.06-0.2 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 18-22 | 0.04-0.15 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 10-18 | 0.04-0.15 | ⚪ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 12-16 | 0.04-0.15 | ⚪ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 5-16 | 0.04-0.1 | ⚪ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 5-6 | 0.04-0.1 | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 6-8 | 0.04-0.1 | |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 6-8 | 0.04-0.1 | |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 4-8 | 0.04-0.1 | |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 5-8 | 0.04-0.1 | |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 40-60 | 0.06-0.2 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 30-40 | 0.06-0.2 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 13-18 | 0.04-0.15 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 20-30 | 0.04-0.15 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 30-40 | 0.06-0.2 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 18-22 | 0.06-0.2 | ⚪ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 55-75 | 0.06-0.2 | ⚫ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 8-10 | 0.06-0.2 | ⚪ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 10-15 | 0.04-0.1 | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 16-20 | 0.06-0.2 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 16-20 | 0.06-0.2 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 16-20 | 0.06-0.2 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 2-5 | 0.04-0.1 | |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 2-5 | 0.04-0.1 | |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 2-5 | 0.04-0.1 | |
Last viewed
ATORN solid carbide end mill T3 HA, 8.0 x 22 x 28 x 64 mm, coated
MICRO-EPSILON ME diameter 1.9 mm working length 300 mm viewing dir. 90 deg.
ATORN twist drill TLP HSSE, DIN 340, 1.4 mm x 70 mm x 45 mm, 130°
ATORN thread boring bars, internal, left, SIR/L 0013 M16
KIENINGER solid carbide die-sinking cutter GWR 8.0 x 27 x 102 mm