ATORN twist drill TLP HSS, MK 2, 16.0 mm x 500 mm x 400 mm, 130°
Brand: ATORN
Surface: Uncoated
DIN: 341
Length: 500 mm
Art.-no. 11085163
Manufacturer article no. 10472680
EAN 4050293035735
Application
Geometry with deep-hole profile for application up to a strength of 1000 N/mm².
Execution
- Twist drill with deep-hole profile
Advantage
- Deep-hole profile for optimised chip removal at greater drilling depths without venting
- effective removal of chips thanks to large chipping spaces
Notes
chamfer nitrated < Ø16; steam treated > Ø16
Brand | ATORN |
Main EAN Code | 4050293035735 |
Manufacturer Part Number | 10472680 |
Cutting material | HSS |
Surface | Uncoated |
Type | TLP |
Angle of the tip | 130 Degree |
DIN | 341 |
Tool holding device | Morse taper shank |
Cutting edge diameter | 16 mm |
Chip flute length | 400 mm |
Length | 500 mm |
Morse taper size | MK 2 |
f steel 1000 | 0.2 mm/r |
Gross Weight | 0.480 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 20-28 | 0.28 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 20-28 | 0.28 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 18-22 | 0.2 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 10-18 | 0.2 | ⚪ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 12-16 | 0.2 | ⚪ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 5-16 | 0.18 | ⚪ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 5-6 | 0.18 | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 6-8 | 0.18 | |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 6-8 | 0.18 | |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 4-8 | 0.18 | |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 5-8 | 0.18 | |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 40-60 | 0.28 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 30-40 | 0.28 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 13-18 | 0.2 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 20-30 | 0.2 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 30-40 | 0.28 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 55-75 | 0.28 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 18-22 | 0.28 | ⚪ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 8-10 | 0.28 | ⚪ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 10-15 | 0.18 | ⚪ | |
| 3.10 Graphite | C8000 | <60 | - | ⚪ | ||
| 3.11 Composite materials | - | ⚪ | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 16-20 | 0.28 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 16-20 | 0.28 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 16-20 | 0.28 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 2-5 | 0.18 | |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 2-5 | 0.18 | |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 2-5 | 0.18 | |
Last viewed
ANKE workbench model 253 V panel zinc sheet ctg., 1500x700x900 mm, RAL 7035/7016
WTS mod. roll. shutt. cab. hous. HxWxD 1950 x 1018 x 620 mm RAL 7035 light grey
ATORN solid carbide mini end mill, diameter 2.5 x 3.7 x 12 x 50 mm, HA shaft
VARIOFIT sw-500.311/AG high shelf trolley, RAL 7016 LxWxH 950 x 450 x 945 mm
ANKE workbench model 255 V, panel, zinc sheet coating, 1500x700x850 mm, RAL opt.
ATORN SC torus mill cttr long TiAlSiN 3x3.5x75 mm clearance 2.9x32 mm R 0.5 mm