ATORN twist drill TLP HSSE-TiAlN, DIN 1897, 6.7 mm x 70 mm x 31 mm, 130°
Brand: ATORN
Surface: TiAlN
Length: 70 mm
DIN: 1897
Art.-no. 11088121
Manufacturer article no. 10480447
EAN 4050293326307
Application
Geometry with deep-hole profile for application up to a strength of 1300 N/mm².
Execution
- Twist drill with deep-hole profile
Advantage
- Deep-hole profile for optimised chip removal at greater drilling depths without venting
- effective removal of chips thanks to large chipping spaces
- TiAlN coating for increased service life demands
Delivery
Packing unit: drill Ø 1.0-6.0 mm = 10 units (price per unit)
Brand | ATORN |
Main EAN Code | 4050293326307 |
Manufacturer Part Number | 10480447 |
Cutting material | HSSE |
Surface | TiAlN |
Type | TLP |
Tool holding device | HA parallel shank |
Cutting edge diameter | 6.70 mm |
Angle of the tip | 130 Degree |
Chip flute length | 31 mm |
Length | 70 mm |
f steel 700 | 0.12 mm/r |
DIN | 1897 |
Gross Weight | 0.017 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 30-55 | 0.06-0.2 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 30-55 | 0.06-0.2 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 20-50 | 0.04-0.15 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 20-30 | 0.04-0.15 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 20-30 | 0.04-0.15 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 10-30 | 0.04-0.1 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 8-17 | 0.04-0.1 | ⚪ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 8-18 | 0.04-0.1 | ⚪ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 8-20 | 0.04-0.1 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 6-14 | 0.04-0.1 | ⚪ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 12-22 | 0.04-0.1 | ⚪ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 40-120 | 0.06-0.2 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 30-80 | 0.06-0.2 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 15-40 | 0.04-0.15 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 30-55 | 0.04-0.15 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 35-65 | 0.06-0.2 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 60-120 | 0.06-0.2 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 20-50 | 0.06-0.2 | ⚪ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 10-30 | 0.06-0.2 | ⚪ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 10-30 | 0.04-0.1 | ⚪ | |
| 3.10 Graphite | C8000 | <60 | - | - | ⚪ | |
| 3.11 Composite materials | - | - | ⚪ | |||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 20-35 | 0.06-0.2 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 20-35 | 0.06-0.2 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 20-35 | 0.06-0.2 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 3-10 | 0.04-0.1 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 3-10 | 0.04-0.1 | |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 3-10 | 0.04-0.1 | |
Last viewed
ABUS padlock, TITALIUM series 54TI/30 keyed to differ
ATORN SC mini torus mill cttr TiAlSiN 0.2x0.2x50 mm clearance 0.18x3 mm R 0.05
GFS cutter holder, circular cutter, type 00a, form 5-6
ATORN twist drill N HSS, steam-treated, DIN 340, 8.5 mm x 165 mm x 109 mm, 118°
META dbl plug-in rack CLIP 150 RAL7035 compl. basic sh. 3000x1000x500 mm 2x7 sh.
FEIN Microfasertuch 63733003010
ATORN snipe nose pliers, DIN 5745, 160 mm, curved, 2-component handle
