ATORN twist drill bit VA HSSE TiAlNplus DIN 1897 diameter 1.4 mm
Brand: ATORN
Surface: TiAlN plus
Length: 32 mm
DIN: 1897
Art.-no. 11023604
Manufacturer article no. 10487777
EAN 4066107037642
Application
For use in stainless steel, special alloys up to a strength of 1,300 N/mm².
Execution
- Twist drill bit with stainless steel geometry
Advantage
- Special geometry with aggressive cutting edge design for very smooth cutting
- TiAlNplus coating for maximum service life
Delivery
Packing unit: Drill bit dia. 1.0-6.0 mm = 10 units (price per unit)
Brand | ATORN |
Main EAN Code | 4066107037642 |
Manufacturer Part Number | 10487777 |
Cutting material | HSSE |
Surface | TiAlN plus |
Type | VA |
Self-centring | Yes |
Tool holding device | HA parallel shank |
Cutting edge diameter | 1.40 mm |
Angle of the tip | 130 Degree |
Chip flute length | 9 mm |
Length | 32 mm |
f stainless steel | 0.03 mm/r |
DIN | 1897 |
Gross Weight | 0.001 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 30-55 | 0.02-0.06 | ⚪ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 30-55 | 0.02-0.06 | ⚪ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 20-50 | 0.02-0.04 | ⚪ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 20-30 | 0.02-0.04 | ⚪ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 20-30 | 0.02-0.04 | ⚪ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 10-30 | 0.02-0.04 | ⚪ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 8-17 | 0.02-0.04 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 8-18 | 0.02-0.04 | ⚪ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 8-20 | 0.02-0.04 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 6-14 | 0.02-0.04 | ⚪ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 12-22 | 0.02-0.04 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 40-120 | 0.02-0.06 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 30-80 | 0.02-0.06 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 15-40 | 0.02-0.04 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 30-55 | 0.02-0.04 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 35-65 | 0.02-0.06 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 60-120 | 0.02-0.06 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 20-50 | 0.02-0.06 | ||
| 3.08 Duroplast | Bakelit, Melamin | <150 | 10-30 | 0.02-0.06 | ||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 10-30 | 0.02-0.04 | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 20-35 | 0.02-0.06 | |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 20-35 | 0.02-0.06 | |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 20-35 | 0.02-0.06 | |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 3-10 | 0.02-0.04 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 3-10 | 0.02-0.04 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 3-10 | 0.02-0.04 | ⚫ |
Last viewed
ANKE ass. workb. 706 V - wheeled, panel solid beech LxDxH 1270 x 700 x 850 mm
GEDORE RED socket set, 94 pieces 1/4 inch, 1/2 inch
ATORN end mill for indexable inserts IC T=1 10.0 x 80mm shaft D=16.0mm DIN 1835B
ORION HSS hand reamer, H7, B, 6°, 35.0mm x 284mm, T=12, DIN 206
YOKOTA cordless impulse wrench YZ-T600E
ATORN elec. dial gauge 12.5 mm meas. range 0.01 mm increment for dynamic meas.
