ATORN 5-A multi-clamp two-in-one set

Application

Unique innovative system design that combines two basic applications in one product. Two-in-one for use as a 5-axis or multi-clamping system. Highly flexible, modular jaw range, positive-locking jaw connection.

Execution

• The position of the fixed and movable jaws on the rail can be altered so that large and small parts are always accommodated centrally relative to the table
• System is infinitely extendable using the adapter set (available on request)
• When clamping with an increased clamping width, the clamping distance is only 30 mm less than rail length. Example: With a rail length of 400 mm, the clamping width can be 370 mm. Only using the large part jaw
• Positive-locking jaw interface
• Easy to clean: If necessary, the entire system can be disassembled, cleaned and reassembled in just a few minutes
• 100 mm clamping range without adjustment
• 40 kN clamping force at a tightening torque of 85 Nm
• Torque wrench 20-120 Nm ref. no. 52240120; screwdriver bit AF 12 hex 1/2 drive ref. no. 58688320

Advantage

• Extremely stiff for low vibration
• Two in one: The system can be used as a 5-axis and multi-clamping system. This is a unique feature. The base is an ATORN clamping rail from the 120 series
• Tool-free spindle extension - mounting and removal in one click. Smart clamping solution at a great price
• Simple and straightforward to use. The system can be changed over very quickly
• Optimised interfering edge design

Delivery

1x clamping rail, 1x complete 5-axis system, 2x standard jaws, 2x screw-in jaws, spindle extensions (number of pieces dependent on version and rail length)