BOSCH Cross countersink HSS-E 21 mm 10 - 15 65 mm 10 mm 2608597513
Brand: BOSCH
Description Short: BOSCH Cross countersink HSS-E 21 mm 10 - 15 65 mm 10 mm 2608597513
Art.-no. 95047868
Manufacturer article no. 2608597513
EAN 3165140107280
The HSS cross-hole countersink works continuously without chattering and leaves no burrs. The cross hole prevents clogging of the drill bit by chip flutes and is optimized for chip removal and clean countersinking. The drill bit is made of alloyed HSS steel with 5 % cobalt content for the best surface quality. This product is suitable for countersinking screws and deburring holes in metal. It is used for non-ferrous metals, alloyed and unalloyed steel, cast iron and stainless steel. The drill bit has a countersink angle of 90 degrees and drills best at low speeds.
Brand | BOSCH |
EAN | 3165140107280 |
Manufacturer Part Number | 2608597513 |
Description Short | BOSCH Cross countersink HSS-E 21 mm 10 - 15 65 mm 10 mm 2608597513 |
Gross Weight | 0.065 kg |
Certificates/ Documents (1)
Last viewed
ATORN HELITUF stainless V2A wire tube brush, 0.13 mm, 10x11x25x89 mm
GEDORE AUTOMOTIVE foam insert 3283976
KLINGSPOR CS 411 Y, belt dimensions 150 x 2000 mm, grit P 40, F4G, closed coat
METABO felt disc 150x5x25.4 mm soft for fillet weld grinder 626395000
ATLAS safety shoe C 1805 XP ESD S1P W10 size 47 17500-47
fork extensions, open design, length 1800 mm, WxH 148x48 mm, RAL 7021
ATORN test pin RSB TC1 11.47 mm x 70 mm
SCHULTE Basic shelving Steck MULTIplus150 RAL7035 6 shelves 2500x1000x800 No. 32681
