DIEBOLD UltraGrip power chuck BT 50 x 32 A 105 DIN 69871
Brand: DIEBOLD
Art.-no. 23362013
Manufacturer article no. 72.170.560.810
Application
For clamping tools with straight shank, widely projecting cutting tools or extensions, and straight shanks in accordance with DIN1835A and B.
Execution
- Optimum concentricity thanks to one-piece basic body at 2.5 x dia. ≤ 3 µm.
- Maximum clamping force and stability due to clamping with roller clamping nut with needle bearing.
- Maximum retention force up to 1,800 Nm depending on diameter.
- Optimum concentricity thanks to one-piece basic body.
- Internal coolant supply up to 80 bar.
- Flexible use thanks to intermediate bushes.
- For clamping, an assembly trestle and collet chuck wrench are required.
Advantage
- Ideally suited for large cutting depths.
- Ideal for high feed rates.
- Vibration-damping design.
- High safety prevents milling shanks from being pulled out.
- Maintenance-free technology.
Notes
The previous standard JIS B 6339 MAS BT was replaced by ISO 7388-2.
Delivery
1x power chuck in accordance with ISO 7388-1 (DIN 69871) UltraGrip.
 | |
Brand | DIEBOLD |
Manufacturer Part Number | 72.170.560.810 |
Tool holding device | BT 50 |
Clamping diameter (d) | 32 mm |
Projecting length (A) | 105 mm |
Outer diameter (D) | 66 mm |
Tapered diameter (d2) | 63 mm |
Clearance length to collar (L1) | 837 mm |
Clamp in depth (L2) | 82 mm |
Wrench type | 2 |
Coolant supply | Internal axial |
Balancing quality | G 2.5 at 20,000 rpm |
Product Group | 293 |
Gross Weight | 4.694 kg |
Last viewed
ATORN combination wrench 22 mm DIN 3113 A
AUTOSTAT 77003157 bush original spare part
DAkkS calibration precision pointer snap gauge ≤ 100 mm
ATORN twist drill X HSSE-PM TIN, DIN 338, 5.3 mm x 86 mm x 52 mm, 118°
NÖLLE PROFI BRUSH BECOnnect wood wiper 400 mm
WALTER D3120 indexable insert drill 4xD 42.0 mm x 278 mm internal
ATORN countersink, 90°, HSSE, T=3, 16.5 x 60 mm, DIN 335 shape C
ATORN wire end brush, dia. 10 x 40 mm, shank 6 mm, crimped V2A wire, 0.3 mm
