ELCOMETER layer thickness gauge A456C, type B, for separate FNF probes
Brand: ELCOMETER
Art.-no. 45800615
Manufacturer article no. A456CFNFBS
Application
For measuring non-magnetic coatings (paints, plastics, chrome, copper, zinc etc.) on magnetic substrates and for measuring non-conductive coatings (paints, plastics etc.) on non-metallic substrates (copper, aluminium, zinc, bronze, brass, etc.)
Execution
- Robust ABS plastic housing
- Large, easy-to-read 2.4" colour display
- Degree of protection: IP 64, dust-proof and water-resistant
- Data logging, concave from R=2 and convex from R=25
- Connection for combined sensor FNF for ferrous (F) or non-ferrous (NF) metal substrates
Advantage
- Fast samplings rates of over 70 measurements per minute
- Various calibration methods stored
Notes
Probes not included in scope of delivery. For suitable probes, see 45800 650-665.
Delivery
Measuring instrument, hand strap, plastic bag, 2x AA batteries, operating instructions
Brand | ELCOMETER |
Manufacturer Part Number | A456CFNFBS |
Model | A456CFNFBS |
Type | B |
Probe design | FNF |
Test probe | Separately |
Min./max. layer thickness display range | 0-31 mm |
Layer thickness resolution | < 100 µm: 0.1 µm |
Measuring rate | > 70 measurements/min |
Data transmission type | USB |
Internal memory | 5 measured values |
Adjustable limit values | No |
Calibration memory type | Gauge |
Calibration methods | One-point calibration, Two-point calibration, Reset to factory calibration |
Harmonized System Code | 90318080 |
Gross Weight | 0.597 kg |
Last viewed
ATORN solid carbide radius cutter T2 HA, 50 x 8 x 18 x 54 mm, coated
DAkkS calibration micrometer 25 - 100 mm
ATORN VDE screwdriver set, 6 pieces, 2.5/3.5/4.0/5.5/PH 1, PH 2
TESATAST lever gauge probe, 0.01 mm, diameter 28 mm, in case
Extension sleeve MK 4/4 500 mm
HAZET pin 9012EL-017/2N
AMF hook wrench with nose, 180-195 mm, DIN 1810 A