End mill PM TiAlN, type N, 20.0 mm, DIN 844B/long, DIN 1835B shank
Brand: ORION
Surface: TiAlN
Length: 141 mm
Art.-no. 15904200
Manufacturer article no. 15904200
EAN 4039247559244
Application
End mill for universal machining in a wide range of materials.
Execution
- HSSE PM - optimised cutting material for unstable clamping conditions and increased service life
- Finishing teeth
- Centre cutting
- TiAIN-coating for maximum service life
- Straight shank DIN 1835 B
- Twist angle 30°
Brand | ORION |
Main EAN Code | 4039247559244 |
Manufacturer Part Number | 15904200 |
Cutting material | HSSE-PM |
Surface | TiAlN |
Type | N |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 30° |
Edge protection chamfer length | 0.2 mm |
Tool holding device | HB parallel shank |
Construction length | Long |
Cutting edge diameter | 20 mm |
Cutting edge length | 75 mm |
Length | 141 mm |
Shank diameter | 20 mm |
fz steel 700 | 0.13 mm |
Gross Weight | 0.277 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 80-90 | 0.12 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 80-90 | 0.12 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 60-70 | 0.12 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 50-60 | 0.12 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 40-45 | 0.11 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 50-60 | 0.11 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 40-45 | 0.11 | ⚪ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 35-40 | 0.11 | ⚪ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 30-40 | 0.11 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 30-35 | 0.11 | ⚪ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 40-45 | 0.11 | ⚪ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 200-450 | 0.12 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 120-140 | 0.12 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 60-80 | 0.11 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 60-80 | 0.11 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 100-120 | 0.12 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 160-180 | 0.12 | ⚪ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 80-90 | 0.12 | ⚪ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 100-120 | 0.12 | ⚪ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 100-120 | 0.12 | ||
| 3.10 Graphite | C8000 | <60 | - | |||
| 3.11 Composite materials | - | |||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 60-90 | 0.15 | ⚪ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 60-90 | 0.15 | ⚪ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 60-90 | 0.15 | ⚪ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 15-30 | 0.008 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 15-30 | 0.07 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 10-30 | 0.07 | ⚪ |
Last viewed
ATORN solid carbide mini radius cutter T2 HA, 2.0 x 2.0 x 10 x 55mm, coated
SATA nozzle set SATA jet 1000 B RP 2.0 mm
ATORN RockTec PRO mini end mill, long neck 2x3x25x60 mm T=2 HA
YOKOTA pneumatic impulse wrench YLTX70E 3/8 inch square with shut-off
ANKE workbench model 428 V 2000 x 700 x 900 mm, solid beech panel, colour opt.
ESD shelf trolley, 4 shelves, H 1800 mm, 1200 x 800 mm, load capacity 600 kg
