Extens. for hydr. exp. chuck dia. 12 x 150 mm shank dia. 20 mm with IC
Brand: ATORN
Length: 150 mm
Art.-no. ZR23338110
Manufacturer article no. 21040300
EAN 4050293359213
Application
Highly flexible extension for HYDRO expansion and collet. For high precision centric clamping of milling, drilling and reaming tools.
Execution
- Rapid tool change and axial length adjustment.
- All standard shaft diameters (h6) can be clamped.
- Central coolant supply (ICS) up to 80 bar.
Advantage
- Outstanding damping properties.
- Wide clamping range thanks to use of intermediate sleeves.
- High torque transfer (dia. 20 = 80 Nm/dia. 20 = 330 Nm).
- Very good accessibility thanks to minimal interference contour.
- Flexible thanks to the use of intermediate bushes.
 | |
Brand | ATORN |
Main EAN Code | 4050293359213 |
Manufacturer Part Number | 21040300 |
Clamping diameter (d) | 12 mm |
Shank diameter (d1) | 20 mm |
Outer diameter (D) | 25 mm |
Length (L) | 150 mm |
Projecting length (A) | 100 mm |
Clamp in depth (l2) | 46 mm |
Suitable for thread (G) | M10 x 1 |
Width across flats | 5 mm |
Max. adjustment travel (max. V) | 10 mm |
Concentricity tolerance | 0.006 mm |
Coolant supply | Internal |
Balancing quality | G 2.5 at 25,000 rpm |
Harmonized System Code | 84661038 |
Gross Weight | 0.500 kg |
Last viewed
CEJN steel plug-in nipple, R 1/4 inch male thread
ATORN SC end mill D 20.0 x 38 x 58 x 100mm, HB shaft 4 cutting edges, ULTRA MS
ORION indexable insert, negative, SNMM 150616-RM1 OHC7625
ORION SC end mill XL teeth=3 D 10.0 x 45 x 95mm 30 degrees HB shaft TiAlN
ATORN HPC POWER SC end mill, HARD, 20 x 20 x 40 x 92 mm r=1 HB, type H, short
ATORN indexable insert, CBN, uncoated, CNGA 120402 ABC40/A