HALDER threaded lifting pin M10 self-locking load capacity 397 kg TÜV-tested
Brand: HALDER
Art.-no. 77241100
Manufacturer article no. 22352.0010
EAN 4030618701859
Application
For lifting loads. The threaded support bolt is inserted into a threaded hole and secures itself. In contrast to a ring screw, this eliminates time-consuming screwing and unscrewing.
Execution
- Stop point with self-locking thread
- Shackles made of heat-treated steel, tempered, manganese phosphate-coated
- Stainless steel 1.4542 thread element, precipitation-hardened
- Movable shackle
- Loosen the safety bar to prevent accidental release
- High-strength, precipitation-hardened bolts
- Aluminium press stud
- TÜV tested – in accordance with DIN EN 13155
Advantage
- Time savings of up to 95% compared to conventional ring bolts
 | |
Brand | HALDER |
Main EAN Code | 4030618701859 |
Manufacturer Part Number | 22352.0010 |
Thread dimension | M10 |
Load-carrying capacity (W.L.L.) | 397 kg |
Material of shackles | Steel tempered |
Surface of the shackle | Manganese phosphated |
Material of bolt | Steel tempered |
Material of spring | Corrosion resistant steel |
Material of push knop | Aluminium |
Weight | 218 g |
Max. temperature | 250 °C |
Design | Self-locking |
Operation | By pressing the button |
With corrosion protection | Yes |
Length to centre of bolt (l1) | 14 mm |
Bolt length | 20 mm |
Length 3 (l3) | 25.70 mm |
Bolt length above (l4) | 36 mm |
Interior height (l5) | 27 mm |
Internal width (l6) | 30 mm |
External width (l7) | 49 mm |
Height (l8) | 87.5 mm |
Outer diameter (d2) | 8.35 mm |
Diameter bolt top (d3) | 21.50 mm |
Thread length (L) | 10 mm |
Gross Weight | 0.230 kg |
Last viewed
ATORN twist drill x HSSE-PM TiN, DIN 1897, 6.1 mm x 70 mm x 31 mm, 118°
Honing brush for holes with diameter up to 28.6 mm
GEDORE double open-end wrench 9 x 10 mm DIN 3110
ORION reamer HSSE T=6 D, 7-8° 5.0mm H7 x 86mm x 23mm HA DIN 212
HK assembly trolley, H x W x D 930/800 x 570 x 680 mm with 5 part. ext. drawers
ATORN twist drill U4 HSSE, DIN 338, 4.3 mm x 80 mm x 47 mm, 118°
EROGLU shrink-fit chuck SK50-32-100