For trade customers only   Welcome to METZLER
INTERAPID lever gauge probe, 0.01 mm graduation, 30 mm, vertical - Lever gauge probe INTERAPID lever gauge probe, 0.01 mm graduation, 30 mm, vertical - Lever gauge probe INTERAPID lever gauge probe, 0.01 mm graduation, 30 mm, vertical - Lever gauge probe
INTERAPID lever gauge probe, 0.01 mm graduation, 30 mm, vertical - Lever gauge probe - 1
INTERAPID lever gauge probe, 0.01 mm graduation, 30 mm, vertical - Lever gauge probe - 2
INTERAPID lever gauge probe, 0.01 mm graduation, 30 mm, vertical - Lever gauge probe - 3
TESA TECHNOLOGY

INTERAPID lever gauge probe, 0.01 mm graduation, 30 mm, vertical

Brand: TESA TECHNOLOGY

Calibration Group: L

Art.-no. 33301020

Manufacturer article no. 074111376

EAN 7630041119183

All versions

Individual prices for customers after login

You need more information or have not found your desired product?

Application

For measuring deviations in concentricity, axial run-out, parallelism and flatness. For centring shafts of boreholes and aligning workpieces.

Execution

  • Housing with hardened, bolted-on dovetail fixtures
  • High sensitivity, low measuring force
  • Automatic switching of callipers direction
  • Measuring mechanism on ruby bearings

Advantage

  • Art. no. 33300: Angled dial face, simplified reading
  • Mounted using dovetail or shaft Ø 4 mm

Notes

The device differs from conventional lever gauge probes as it is the only device on the market that has been designed to ensure that the measurement is accurate and does not require correction at a pitch angle of 12°. This technical advantage allows users to determine the absolute value without having to apply a correction to the value read off the device.

Delivery

With measuring probe made from hardened steel ball diameter 2 mm, in a case.

Product information

METZLER Catalogue

Certificates/ Documents

 | 

 | 

Brand

TESA TECHNOLOGY

Main EAN Code

7630041119183

Manufacturer Part Number

074111376

Length measuring range

1.6 mm

Scale value

0.01 mm

Measurement force

0.12 N

Length of measuring sensor from centre of ball

16.5 mm

Material of measuring ball

Steel

Ball diameter

2 mm

Pivot range of measuring sensor

210 Degree

Diameter

30 mm

Connection thread

M1.7

Calibration Group

L

Gross Weight

0.128 kg

Additional accessory:
 
Product
Description
Quantity
Price per
Price
Factory calibration for lever gauge probe 1–3 mm
Factory calibration for lever gauge probe 1–3 mm

Factory calibration

MELUTEC
x 1 Piece
DAkkS calibration lever gauge probe, 1 - 3 mm
DAkkS calibration lever gauge probe, 1 - 3 mm

DAkkS calibration

MELUTEC
x 1 Piece
labelling/lettering/engraving up to 16 chars to be specified in shopping basket
labelling/lettering/engraving up to 16 chars to be specified in shopping basket

Labelling/lettering/engraving up to 16 characters (more than 16 characters available upon request)

x 1 Piece
DAkkS calibration without sticker lever gauge probe 1–3 mm
DAkkS calibration without sticker lever gauge probe 1–3 mm

DAkkS calibration

MELUTEC
x 1 Piece
The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)
In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.
Alternative products:
ATORN lever gauge probe, 0.01 mm scale 40 mm ring, 15.9 mm gauge slide length
1 x
ATORN lever gauge probe, 0.01 mm scale 40 mm ring, 15.9 mm gauge slide length

Lever gauge indicators

ATORN
Quantity: 1 x
The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)
In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

METZLER Catalogue

CAD data (available after login)

Certificates/ Documents

 | 

 | 

Technical information
Show all product details