METRON force sensor, type LPX, measuring range 0–50 kN
Brand: METRON
Art.-no. 44506500
Manufacturer article no. LPX 50 KN
Application
For compressive force sensing, e.g. on test stands, for monitoring and controlling manufacturing processes in combination with measuring and display units, e.g. MMV 22 or MEC-9163
Execution
- Measurement ranges from 25 kg (250 N) to 50,000 kg (500 KN)
- Steel measuring body, nickel-plated
- Cable length 3 m without connector (unconnected wires)
- 4-conductor technology (input: + red, - black, output: + green, - white)
- Four fixing threads on housing floor
- IP67 degree of protection
Advantage
- High reproducible accuracy: 0.07% of nominal value
Notes
Please note: Compatible plug for display unit and factory calibration certificate on request.
 | |
Brand | METRON |
Manufacturer Part Number | LPX 50 KN |
Min./max. force of measuring range | 0-50000 N |
Outer diameter | 100 mm |
Overall height of force sensor | 30 mm |
Piston diameter | 20 mm |
Protruding piston height | 5 mm |
Fastening thread | 4 x M6 |
Overload limit | 1.5 x measurement range FN |
Sensitivity of force sensor | 2 mV/V |
Error limit, based on end value | 0.3% |
Min. supply voltage1 | 5 V/AC |
Max. supply voltage | 20 V/AC |
Min./max. supply voltage | 5-20 V/AC |
Cable length | 3 m |
Gross Weight | 1.500 kg |
Last viewed
ZEUS roller pin for knurl pressing tool, 6.0 mm x 20 mm 06TER1018
ATORN screw tap SC TICN D DIN 371 0° M6 1 mm ISO2 x D/S 1.5xD CNC conv. H
KERN hand scales CH 50K50, weighing range 0–50 kg, 50 g increment
Fine ribbed rubber mat, black, roll 10 x 1 m, 3 mm thick
ATORN SC HPC POWER end mill, STEEL, 20.0 x 20 x 40 x 92 mm HA, type N, short
ATORN mini cutting insert AIL 6.0mm L22 1.25 ISO HW5615
ATORN ultra-solid carbide VA end mill, 6.0 x 13 x 57 mm, DIN 6535 HB shaft